welding flux - [ Sell Product ]

Place of Origin : Qingdao,China
Post Date : 22-03-2012
Expiry Date : 29-04-2016

Trade Description

ZT.SJ202(Bonded Flux) DESCRIPTION: ZT.SJ202 Is A Kind Of Aluminum Alkalescence Agglomerated Flux(buried Arc,piled To Weld).It Is Spherical Pellet With Shallow Grey, Size10-60 Mesh. Welding Technical Properties Is Fine . It Is Easy To Take Off Dreg Voluntarily. It Is Polished To Weld Groove Surface, Cold To Endure, Heat-resisting, Exhausted To Endure And Wear-resisting. Fight The Oxidize Of High Temperature, Welding With Direct Current Source. APPLICATIONS: In Combination With Welding Wires, Such As H08CrMoA、H3Cr2W8、H3CrMnSi Applies To Various Work Surfaces Of Wear-resisting Harm, Fight Impact And Fight The Oxidize Of High Temperature , Such As The Pipeline Mould Of Cast Iron And Iron Roll. THE WELD HARDNESS OF LAYER: In Combining With Different Welding Wires, 40-50HRC、50-60HRC. GUIDELINES FOR USAGE: 1.Dry The Flux At 300-350℃ For Two Hours Before Use 2.Completely Remove Rust,oil And Dirt From The Groove Surface Prior To Welding.

^{Company Inforamtion}