400 / 13DL Copper Wire Rod Breakdown Machine , Rod Drawing Machine - Product

Other Specification : 400/13DL Copper/Copper Alloy Rod Breakdown Machine I. Quick Description HXE-400/13DL Copper/Copper Alloy Rod Breakdown Machine Is Used To Draw Single Bare Copper/alloy Wire From 8mm To 1.2mm-3.5mm.The Drawing Capstans Are Arranged In A Line That Are Able To Work Continuously With Drawing Speed And Electrical Control Can Be Matched With Each Other. II. Compositions Of Equipment - - - - Name | Quantity | 1. Pay-off Shelf | 1 | 2. HXE-400/13DL Main Drawing Machine | 1 | 3. HXE-180 Tension Controller | 1 | 4. HXE-SX630 Double Spooler | 1 | 5. Electrical Cabinet | 1 | 6. Operation Panel | 1 | 7. User Manual, Inverter Instruction, Installation Layout | | 8. Spare Parts | | - - - - III. Main Technical Parameters - - - - 1. Inlet | 8mm | 2. Outlet | 1.2mm-3.5mm | 3. Diameter Of Capstans | 400mm | 4. Speed | 1200m/min | 5. Slip Ratio | 1.238 | 6. Quantity Of Capstan | 13 | 7. Capstan | Tungsten Carbide | 8. Quick Dies Change | Available | 9. Main Motor | DC 200KW | 10. Fix Speed Motor | DC 55KW | 11. Gear | Changeable | 12. Noises Of Machine | 85 Db | 13. Protection Cover | Installed | 14. Lubrication System | 1 Set | - - - - IV. Operation & Maintenance Preparation Before Running Check All The Lubrication Parts Of The Transmission Parts. Check Wire-break Auto Stop Device, Safety Doors. Check Coolant Water, Lubrication Oil, Steam, Compressed Air. After Checking, Jogging Machine As Lower Than 5m/s (Fix Speed Capstan Lower Than 470r/min), Check All Parts Again. Operation Connect Power. Prepare The Drawing Dies. Prepare The Wire Pointing And Threading. According To The Die List, Place The Wires On The Capstan, Wire Goes Through Each Layer 2-3 Times. Put Wire Through The Fix Speed Capstan T

View Profile