400/13 DL High Speed Wire Drawing Machine , Aluminum Wire Drawing Machine - Product

Other Specification : High Speed HXE-400/13DL Aluminium Wirerod Breakdown Machine I. Application HXE-400/13DL Alinimium Rod Breakdown Machine Is Used To Draw Single Bare Aluminium Wire From 9.5mm To 1.7mm-4.2mm.The Drawing Capstans Are Arranged In A Line That Are Able To Work Continuously With Drawing Speed And Electrical Control Can Be Matched With Each Other. II. Compositions Of Equipment - - - - Name | Quantity | 1. Pay-off Shelf | 1 | 2. HXE-400/13DL Main Drawing Machine | 1 | 3. HXE-180 Tension Controller | 1 | 4. HXE-SX630 Double Spoolers | 1 | 5. Electrical Cabinet | 1 | 6. Operation Panel | 1 | 7. Gear Oil System | 1 | 8. Spare Parts | | 9. Others | | - - - - III. Main Technical Parameters - - - - 1. Inlet | 9.5mm | 2. Outlet | 1.7mm-4.2mm | 3. Diameter Of Capstans | 400mm | 4. Speed | 1000m/min; Capacity Say 1.7mm, 360KG. | 5. Slip Ratio | 1.42-1.2 | 6. Quantity Of Capstan | 14 | 7. Capstan | Tungsten Carbide | 8. Quick Dies Change | Available | 9. Main Motor | AC 160KW | 10. Fix Speed Motor | AC 55KW | 11. Gear | Not Changeable | 12. Noises Of Machine | 85 Db | 13. Protection Cover | Installed | 14. Gear Oil System | 1 Set | - - - - IV. Shipping & Installation Shipping There Are Two Lifting Rings On The Drawing Machine, Four On Then Annealing Machine. Installation (See Attached Drawing) According To The Drawing, Make The Foundation. When Machine Is In Position, Install Bolts And Adjust The Center Line. When Concrete Is Drying, Adjust Center Line Again And Fix The Bolts. Adjust Before Adjusting, Check And Clean All Parts. V. Advantage And After-saleservice A: Advantage (1). HENGXIE Has Some World Famous Parts Suppliers, Has Special Lubrication System For The

View Profile