Ethernet&POE Over Coax Up to 3,280ft - Product
Place of Origin : Shenzhen,China
Delivery Terms : 3 Working Days
Product Description
The MB-ECP01 is single POE Transmission that can transmit 10/100 Base-T Ethernet signal ,and Maximum supply 12V/2A Power to the Ethernet Devices ,at the same time.it allows any CCTV IP camera or other Ethernet Devices to be connected within extended distance without extra power.With super interference rejection and multi-stage high-end TVS for surge protection,the MB-ECP01AT/AR supports Ethernet Signal to be transmitted up to 1000ft(300m)at the speed of 92Mbps.
Basic Information
Brand : MuxBOXS
Model : MB-ECP01
Material : Aluminum Alloy
Color : Black
Physical Specification
Weight : 695g
Other Specification : Product Name 1-CH Ethernet &Power Long Distance Transmission
Devices CCTV IP Cameras, NVR, IP Encoders,network Switches And Any Device With A 10/100Mb/s Ethernet Port, Supporting IP
Standard Supported IEEE 802.3 10BaseT,IEEE 802.3U 100Base-TX,
IP Ver 4 And 6.
Maximum Distance Distance Total Transmission Rate (max) Power ( Output For Devices )
1000ft (300m) 92Mbps 24 Watts(Max)
1640ft (500m) 86Mbps 13.9Watts(Max)
2624ft (800m) 54Mbps 8.6Watts(Max)
6560ft (2km) 35Mbps NA
RJ45 Ethernet Interface Connector RJ45
Wire Type 4-pair Cat5 Or Better
Distance Up To 328ft (100m)
Speed 10/100Base-T,half/full Duplex,auto-negotiation Auto MDI/MDIX Cross-over
Latency 3mS
Coax Cable Interface Connector BNC, RG-59/U Or Similar
Impedance 75Ω
Power DC Input 48V/1.5A
Power Connsumption 1.2Watts(Max)No External Supply Required
12VDC Output For Devices 24 Watts (Max)
Leds Indicator Green Led Coax Cable Connect
Yellow Led Network Signal Communication
Surge Protection 2KV(different-mode), 4KV(common-mode)
Temperature Operating: 0° To 60°C
Storage: -20° To 85°C
Humidity: Up To 95% Non-condensing
Enclosure Aluminum Alloy
Dimensions(packaging) 220*160*85mm
Weight(packaging) 515g
