200W Grid tie Inverter - Product

Place of Origin : Shenzhen,China

Product Description

Easy operation:connect your solar panel(DC10.5V to DC28V ) to this grid tie inverter and plug the AC power to your home power socket.If your power system need the Wide Input Voltage,try to reference our Low frequency series.

In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid inverter 1000W of stack used is equal to 4000W.

Physical Specification

Other Specification : Feature: - Generates Pure Sine Wave - Automatic Power Adjustment - Constant Power Output - Low Distortion Output On All Ranges - Allow Different Power Factor From Loads - Compact And Light Weight Design - Maximum Power Point Tracking (MPPT) - Optimize Power Output - Plug And Play Design, Simply Plug Into An Outlet (GFI), No Hard-wiring - Stackable (connect In Parallel For Higher Output) - Aluminum Enclosure Will Act As Heat Sink To Help Dissipate Heat - Simple And Safe Installation - Island Protection: Inverter Will Shut Down During Black Outs. - Grid-Tied - Sell Green Power Directly Back To The Grid At A Premium Rate (depends On Your Location) Specification: Grid-inverter Type YTP-200 Recommended Maximum PV Power Ppv=260Wp DC Maximum Input Power PDC.max=220W DC Maximum Voltage VpvDC28VDC PV MPPT DC Voltage Range Vpv 10.5V~28DC Peak Inverter Efficiency ηmax>94% Power Factor 0.93-0.99 PV Maximum Input Current Ipv.max10A Reverse Polarity Protection Fuse AC Rating Output Power 175W AC AC Maximum Output Power 200W AC AC Normal Voltage Range 80V-130;160~260VAC AC Frequency 45-65Hz Inverter Output Current Total Harmonic Distortion THDIAC <5% Phaseshift <1% Island Effect Protection Inverter Shuts Down During Black Out Output Waveform Pure Sine Wave Inverter Output Shorting Protection Current Limiting Standby Power Consumption <8W Nighttime Power Consumption <1W Ambient Temperature Range -20 ℃~65℃ Cooling Convection Cooled With Fan Ambient Humidity 0~100%(Indoor Type Design) Eelectromagnetic Compatibility EN50081.part1 EN50082.part1 Power Network Disturbance EN61000-3-2 Power Network Detection DIN VDE 126 Display 1 Red And 1 Green LED Unit Dimension（L*W*H） 220x165x58mm/280 X220 X130mm

^{Company Inforamtion}