Sodium Naphthalene Formaldehyde - Product

Place of Origin : Wuhan,China

Product Description

CASNO.36290-04-7
Sodium naphthalene formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate.

Physical Specification

Other Specification : Sodium Naphthalene Formaldehyde Produces Concrete With Extremely Workable Characteristics Referred To As High Slump. PNS Also Allows Concrete To Be Produced With Very Low Water/cement Ratios At Low Or Normal Slumps.Sodium Naphthalene Formaldehyde Is Ideal For Use In Prestress, Precast, Bridge Deck Or Any Concrete Where It Is Desired To Keep The Water/cement Ratio To A Minimum And Still Achieve The Degree Of Workability Necessary To Provide Easy Placement And Consolidation. Addition RatesSodium Naphthalene Formaldehyde Can Be Added Directly Or Added In After Melt. It Can Be Added During Mixing And After-mixing. The Afterward Approach Can Achieve Better Result. The Suggested Addition Rate Is 0.75%.Sodium Naphthalene Formaldehyde DirectionPrepare Solutions As Required.Direct Use Of Powdery Agent Is Allowed. Alternatively The Addition Of The Agent Is Followed By Water Moisturization (water-cement Ratio: 60%).The Agent Can Be Combined With Other Externally Applied Agents If Pilot Development Or Laboratory Experiment Succeeds. Packing Of Sodium Naphthalene Formaldehyde:Packed In Plastic Film Bag Wrapped With Plastic Woven Sack With A Net Weight Of 25kg Each.

^{Company Inforamtion}