Pad Printing Silicon Rubber - Product

Brand : Hong Ye Silicone
Material : Silicone Rubber

Size or Volume : 20kgs/drum Vacuumed Packing
Other Specification : Pad Printing Silicon Rubber Usages: Pad Printing Silicone Rubber Is Mainly Use For Printing Irregular Patterns On Plastic Toys, Shampoo, Pen, Glass ,electroplating Toys And Trade Makers And So On . Pad Printing Silicon Rubber Description Pad Printing Silicone Rubber As A Carrier Which Transfer Patterns On The Steel Plate To The Toys Products Surface. . Pad Printing Silicon Rubber Features: 1) High Print Times 2) Abrasion Resistance. 3) Good Printing Effects 4) Permanent And Durable Pad Printing Silicon Rubber Operation Instructions: . Step One: Take 100g Of Part A And Add 2g Of Part B And Mix The Silicone Rubber And Curing Agent Evenly. Step Two: Vacuum Pumping Without Exception, This Step Takes Less Than 10 Minutes. Note: The Time For Vacuum-pumping Should Be Less Than 3—5 Minutes ,otherwise, Once The Silicone Rubber Has Cross-link Reaction During Vacuum Pumping Process, It Will Not Be Operated. Step Three: Pouring The Vacuumed Mixture Into The Original Mold Slowly, Shelf Life For Silicon Rubber For Mold Making 8~10months, When Stored In A Dry & Cool Place Under The Room Temperature 25. Packing For Silicon Rubber For Mold Making 20kgs/drum Vacuumed Packing For More Information , Pls Feel Free To Contact Ms Susie Office No. :0086-755-89212380 Mob:86-18684674540 Skype: Susie0017 Email :hyh(at)szrl(dot)net Welcome To Our Website Www Dot Szrl Dot Net

View Profile