Silicone Rubber For Tyre Molding - Product

Brand : Hongye
Model : HY- E
Material : Silicone

Other Specification : Description HY- E Series Addition Molding Silicone Is Generally Named Two-components Silicone Rubber, Part A And Part B. It Features An Exceptional Fluidity And Good Operability. The Mixing Ratio Is 1:1 (10:1),mainly Be Suitable For Making Molds Application. Typical Applications HY- E Series Addition Molding Silicone Could Be Mainly Used For Making Concrete Stones, Wax Molds, PU Molds, Resin Molds, Gypsum Casting, Candle Molding And Chocolate , Candy And Any Other FDA Food Product Mold Making,prototyping Etc. HY-E620 Silicone Rubber Is Has Been Used For Years To Make Tire Pattern Molds . Characteristics 1.Low Shrinkage (less Than 0.1% ) 2.High Tensile And Tear Strength With High Copy Times 3.Easy For Operation (mixing Ratio At 1:1 /10:1) 4.Very Good Flow And Easy For Pouring Operation 5.Fast And Non-shrink Cure At Room Temperature Which Can Be Accelerated Considerably By The Application Of Heat Notice : As Our E-series Silicone Is Platinum Cure Silicone , Which Is Very Easy To Cause Cure Inhibition , So Pls Do Remember Thoroughly Clean The Model And Tool Before Operation . Besides , Pls Avoid The Liquid E-series Silicone Contact Or Mix With The Following Material , Otherwise The Silicone Won’t Be Cured : 1. Liquid Condensation Silicone ( Condensation Silicone Not Completely Cured Or Organic Tin Compounds ) 2 .Sulphur, Sulfide And Sulfur Rubber Materials. 3. Amine Compounds As Well As Contains The Amine Materials. 4 .Pewter Solder Flux. SHELF LIFE: 8-10 Months When Stored Under 24℃ In Original Unopened Packages. PACKAGE: If Ratio Is 1:1 :Packed In 20kg/pail + 20kg/pail And 200kg/pail + 200kg/pail. If Ratio Is 10:1 :Packed In 20kg/pail + 2kg/pail And 200kg/pail + 20kg/pail. For More Information , Pls Feel Free To Contact Hugo: TEL:086-755-89948019 FAX:086-755-89948030 MOBILE:086-15017635728 Website:www(dot)szrl(dot)net E-MAIL:hugochen014(at)gmail(dot)com

View Profile