Platinum cured silicone rubber - Product
Place of Origin : Shenzhen,China
Delivery Terms : Within 3 Days After Payment Confirmed In Our Bank
Delivery Time : Within 3 Days After Payment Confirmed In Our Bank
Product Capacity : 8 Ton Per Day
Payment Terms : T/T, L/C
Product Description
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Basic Information
Brand : Hong Ye Silicone Rubber
Model : Hy-6 Series Silicone Rubber
Material : Silicone Rubber
Color : White Silicone Rubber
Physical Specification
Size or Volume : 20kg/drum For Part A+ 20kg/drum For Part B In One Set
Weight : 20kg/drum For Part A+ 20kg/drum For Part B In One
Other Specification : Description Of Platinum Cured Silicone Rubber
Platinum Cure Silicone Rubber Is A Kind Of FDA Grade Silicone , Generally Named Two-components Silicone Rubber With Translucent Appearance, Part A And Part B Mixing In 1:1 . Suitable For Molds Making Application.
Applications Of Platinum Cure Silicone Rubber
Platinum Cure Silicone Rubber Mainly Used For Making Concrete Stones, Wax Molds, PU Molds, Resin Molds, Gypsum Casting, Candle Molding And Chocolate , Candy And Any Other Food Product Molds Making
Advantage Of Platinum Cure Silicone Rubber
1)Non- Shrinkage (less Than 0.1% )
2)high Tensile And Tear Strength With High Copy Times
3) Exceptional Fluidity And Good Operability (mixing Ratio At 1:1 )
4)high Temperature Resistant In 250 Centigrade
Operation Instruction Of Platinum Cure Silicone Rubber
Step One: Take 100g Of Part A And 100g Of Part B And Mix In 1:1 And Mix The Two Part Evenly.
Step Two: Vacuum Pumping
Without Exception, This Step Takes Less Than 10 Minutes.
Note: The Time For Vacuum-pumping Should Be Less Than 3â€â€ÂÂÂ5 Minutes ,otherwise, Once The Silicone Rubber Has Cross-link Reaction During Vacuum Pumping Process, It Will Not Be Operated.
Step Three: Pouring The Mixture Into The Frame With Original Mold Slowly .
Shelf Life For Silicon Rubber For Mold Making
8~10months, When Stored In A Dry & Cool Place Under The Room Temperature 25.
Packing For Silicon Rubber For Mold Making
20kg/drum For Part A+ 20kg/drum For Part B In One Set
,200 Kg/drum For Part A+ 200kg/drum For Part B In One Set
Contact： Ms CiCi
Tel : 0086-755-89948019
Mobile: 86-18938861890
Skype: CiCi.Silicone
Email : Hyxt(at)szrl(dot)net
Website: Www Dot Szrl Dot Net
