China manual mold design making liquid silicone rubber raw materials - Product
Place of Origin : Shenzhen,China
Delivery Terms : FOB, CIF, CFR
Delivery Time : 5~7 Days After Payment
Product Capacity : 200tons/month
Payment Terms : L/C,D/A,D/P,T/T
Product Description
1.Manual Mold Silicone Rubber FEATURES
Manual Mold Silicone Rubber is suitable for making silicone rubber molds for PVC plastic mould, cement moulds, low melting-point alloy, alloy toys crafts, toys, electronics, handicrafts, stationery, big statues, artifacts copied, (shoe) shoe sole mold making, printing position, electronic devices shock model of product development and design.
Basic Information
Brand : Hongye
Model : HY500
Material : Silicone Rubber
Color : White
Expiry/Validation Period : 3 Months
Physical Specification
Other Specification : 2.Manual Moldmaking Silicone RUbber Using Instructions
It’s A Flowing Fluid, Regardless Of What Color Is. In Fact, Quality Is The Same, And The Component A Is The Flow Of Fluids (silica Gel),B Is The Curing Agent. Handle Copy Product Or Model, Takes A Certain Amount Of Silicone Rubber, Add Percent Of Hardener, Mix For Vacuum Processing, Then Glue Into The Handling Of Processed Mold Box, 2-3 Hours Mold Can Be Cured.
Note: The Vacuum Time Should Not Be Too Long, Otherwise The Silica Gel Curing In Vacuum, Is Not Ready For Use. 1. Hand-made Silica Gel Using Small Pieces Of Product Or The Product Of Fine Pattern. Soft Silicone Should Be Used To Create The Mold, This Is Because The Small Precision Products, Release Time, Mold Inside Of Cosmetic Damage, So Soft Silicone To Manufacture The Mold Must Be Used.
2. If You're A Big Product Or Big Product Copy, Be Sure To Do With Hardness Silicone Molds, So As To Maintain The Product Without Distortion.
Notes:
1. Add Silicone Oil 10%, Hardness Drop To 5 Degrees.
2. Add Silicone Oil 20%, Hardness Will Drop To 10 Degrees.
And So On. Add More Silicone Silicone Oil Pull And Tear Strength Is Going To Get Worse, No Special Circumstances Need Not Add Silicone Oil.
