Antifoam Agent / Silicone Defoamer for Metal Cutting Fluid, acrylic emulsion - Product

Other Specification : Antifoam Agent / Silicone Defoamer For Metal Cutting Fluid, Acrylic Emulsion 1 Properties And Characteristics Of Products: KY-2112 Is A New Type Antifoam Agent Specially Designed For The Metal Cutting Fluid.With Fast Speed In Defoaming And Lasting Foaming-suppresing, Good Stability And Convenient-using Function, It Is Suitable For The Defoaming Requirements Of Various Cutting Fluid. 2Maintechnicalindex: - - - - ItemNoIndex | KY2112A | KY2112B | Appearance | Lightyellowtransparentliquid | Whitemilkyliquid | Solidcontent(%) | 302 | 201 | Viscosity(25,mpa.s) | 500~1500 | 500~1500 | PHValue | 7.0 | 7.0 | Ionictype | Nonionic | Nonionic | - - - - 3 Usage Way And Dosage: 1) Stirring Uniformity Before Using. In Order To Achieve The Best Effection, Must Scatter Defoaming Agent Completely In Foam Medium. Thus You Can Also Dilute Antifoam With 1 ~ 5 Times Amount Of Cold Water In Advance, When Diluting The Antifoam, Should Adding Defoaming Agent Into Water With Stirring Water Slowly And And Mixing Them Blending. Diluted Defoaming Agent Shall Be Immediately Used. 2) If The Defoaming Agent-using System Has Fully Mixing Or Turned Equipments( Can Make The Defoaming Agent Spread Uniformity In Sparkling Medium), The Defoaming Agent Can Be Directly Joined Into Sparkling Medium, There Is No Need For Diluting. 3) Subject To The Influence Of The Factors Of Foaming Medium, Foaming Temperature, Chemical Charateristics, Foaming Content, Difference In Stiring Etc, The Exact Appropriate Concentration Must Be Estimated By Clients Via Testing. 4 Applications: 1), Mainly Applied In Various Of Metal Cutting Fluids, Metal Surface Cleaning Liquid Etc, 2), Water-based Systerm Such As The Acrylic Emulsion. 5 Product Packaging And Storage: 1), This Product Is Packed With 25L, 50L, Or 200L Plastic Drum Or 200L Powder Coating Steel Drum, 2), This Product Should Be Stored In

View Profile