Jenova silicone had focused on RTV-2 mold making silicone rubber since 1994.
There are two kinds of mold making silicone rubber in our company, which are condensation cured
silicone and addition cured silicone according to their different curing system and applications.
These two type of silicone rubber could be applied to make mold for casting material as below
Urethane Plastic
Urethane Rubber
Epoxy
Polyester
Fiberglass
Resin
Plaster/Gypsum
Soap
Wax
Low melt metals (up to 400 degrees Max)
HydroCal White
Hydrocal, Hydrostone
Cement, Concrete and so on.

Condensation-cured silicone rubber,also called tin-cured silicone rubber,are two components which can cure at room temperature (RTV) ,with the features of good flexibility ,high tear-strength ,suitable viscosity which could be used to make mold in pouring way and brushing way.
It could be used to reproduce the large size products (≥1 meter) with complicated patterns,also for the moderate and small size .

Its typical applications are as below:
Resin and polyresin casting with different size.
big plaster or gypsum sculpture Casting ;
Decorative Moldings like Ceiling Domes, Pilaster, Balustrade , Faux stone, Faux rock, Concrete garden furniture and fountains,Cladding stone etc.
Shoe soles molding
Ceramic art and porcelain replicate
Palaeontology and fossil reproduction
Jewellery lost wax master moulds
Candle mould reproduction
Soap mould reproduction
Tire molding
Manual mould design
And so on.
　　

Jenova Platinum cured silicone rubber is two components,and cured at room temperature.
Platinum cured silicone is with many good features: high tear resistance, long mold life, virtually no shrinkage, high dimensional stability over time, non-deformability and excellent reproduction of fine detail,also odourless and non toxic etc.

worldwide

RoHS.MSDS.SGS ISO9001:2000 FDA