Place of Origin : shanghai,China
Post Date : 04-02-2021
Expiry Date : 11-03-2021
Sheet Metal Is A Comprehensive Cold Working Process For Metal Sheets (usually Below 6mm), Including Shearing, Punching/cutting/compounding, Folding, Riveting, Splicing, Forming, Etc. Its Notable Feature Is The Uniform Thickness Of The Same Part. The Basic Equipment Of Sheet Metal Technology Includes A Shearing Machine, CNC Punching Machine, Laser, Plasma, Water Jet Cutting Machine, Bending Machine, Drilling Machine, And Various Auxiliary Equipment. In Addition, Custom Metal Fabrication Services Provide Metal Processing With Aluminum Sheet Metal Panel Fabrication, Stainless Sheet Metal Fabrication, And Titanium Sheet Metal Fabrication, Etc.
Welding
According To Different Materials And Processes, Use Corresponding Welding Methods, Including Laser Welding, Gas Shielded Welding, Argon Arc Welding, Etc.
Welding
Bending
CNC Bending Machine Processing, Can Make Various Types Of Bending Products According To Customer Requirements
Bending
Cutting
Use Laser Cutting, Plasma Cutting, Water Cutting And Other Methods To Process Materials
Cutting
Metal Spinning
The Spinning Method Can Be Used To Complete The Deep Drawing, Flanging, Necking, Bulging And Curling Of Rotating Bodies Of Various Shapes.
Metal Spinning
CNC Punching
Used For All Kinds Of Metal Sheet Parts Processing, Can Automatically Complete A Variety Of Complex Hole Types And Shallow Stretch Forming Processing At One Time.
CNC Punching
Processable Materials For Sheet Metal Fabrication
Copper
Magnesium
Stainless Steel
Carbon Steel
Alloy Steel
Zinc Alloy
Aluminium Alloy
ABS
Aceta
Acrylic
Carbon Fibe
Fiberglass
Nylon
Polycarbonate
Spring Steel
PTEF
PVC
Neoprene
Polyethylene
Polypropylene
Polystyrene
Rubbe
Silicone
NBR
Laser Welding
Welding Parts
Laser Cutting
Dust Cover
Radiating Plate
Radiating Plating
Lamp Shade
Advantages Of Sheet Metal Fabrication
Not Limited By Material Properties
Sheet Metal Processing Can Quickly Process Aluminum Alloy Plates And Cemented Carbides And Can Cut Without Deformation No Matter How High The Hardness Is. And Its Processing Flexibility Is Very Good, Not Only Can Process Any Kind Of Graphics But Also Can Cut Pipes And Other Strange-shaped Materials. And Most Non-metallic Materials Can Also Be Cut Quickly And Efficiently, So CNC Sheet Metal Fabrication Will Not Be Restricted By Any Material Properties.
Fast Processing Speed
The Most Significant Advantage Of Sheet Metal Processing Technology Is The Fast Cutting Speed, And It Will Not Be Limited By The Number Of Processing. However, The Sheet Metal Cutting Service Is More Suitable For The Processing Of Special-shaped Workpieces In The Process Of Processing Because It Does Not Need To Waste Time To Replace The Tool, Which Effectively Increases The Processing Speed; To A Certain Extent, Its Processing Speed And Maximum Positioning Speed Are Lower Than The Speed Of Wire Cutting.
The Effect Is Obvious
Laser Cutting In Sheet Metal Processing Belongs To Non-contact Cutting, And Its Cutting Edge Is Affected By Heat To A Small Degree, Which Can Avoid The Adverse Effect Of Thermal Deformation Of The Workpiece. Moreover, It Can Completely Avoid The Collapse Of The Material When The Material Is Punched And Cut. Generally, The Cutting Seam Does Not Require Secondary Processing, Which Improves The Work Efficiency To A Certain Extent; Not Only That, Its Cutting Head Will Not Contact The Material Surface, Thus Efficiently Ensure That The Workpiece Is Not Scratched.
Sheet Metal Fabrication FAQS
When A Longer Workpiece Is Bent, The Angle Will Be Large At One End And Small At The Other End
Reason: In This Case, There Are Generally The Following Situations: The Thickness Of The Material Is Uneven, One End Is Thick, And The Other End Is Thin. The Mold Wears Unevenly, And The Two Ends Are Different In Height. The Middle Block Is Not Balanced And Not At The Same Level.
Solution: Feedback To Laser Or NCT To Make It Pay Attention To The Choice Of Material, Replace The Mold, Or Adjust The Middle Block.
Several Reasons For Bending And Cracking Of Aluminum Plates
Linear Standard For Bending In Sheet Metal Processing
What Measures Should Be Taken To Protect The Entire Sheet Metal Processing Process
ETCN Is A Professional Machining And Manufacturing Company, We Provide CNC Machining, Metal Stamping, Stainless Steel Sheet Custom Cut, Custom Steel Sheet, Aluminium Fabrication Sheet, Custom Stainless & Sheet Metal, Custom Stainless Sheet Metal, Cnc Manufacturing Services, Custom Machining And Etc. Want To Know More? Please Contact Us.
