Place of Origin : Shaoguan,China
Post Date : 26-07-2022
Expiry Date : 26-09-2023

AGM (Absorption Glass Pad) Cells Are Made Of Special Ultrafine Glass Fiber Separators That Absorb Electrolyte Solutions Between The Panels. The Material Is Designed So That Glass Fibres Can Be Saturated With An Electrolyte And Stored In A Dry Or Suspended State Rather Than As A Free Liquid.
When The AGM Auto Battery Is Working, The Electrolyte Is Transferred From The Glass Pad To The Panel As Needed. The AGM Contains Enough Electrolyte To Allow The Battery To Operate At Its Full Capacity, And If The Battery Housing Is Damaged Or The Battery Tilts The Electrolyte Will Not Overflow, And Has Some Seismic Resistance.
Advantages Of AGM Batteries
?
Maintenance Free.
With Ordinary Batteries In Cars, The Process Of Replenishing The Electrolyte Is Laborious And Harmful. When The Relief Valve Is Unscrewed, A Small Amount Of Sulfuric Acid Gas Escapes From The Battery. Therefore, Ordinary Classic Batteries Should Be Kept In A Well-ventilated Area, As Their Operation And Maintenance In A Closed Room Can Be Hazardous To Human Health. With AGM Tech Battery, The Electrolyte Evaporates Only In The Event Of A Violation Of Charging Requirements And Does Not Need To Be Repaired Throughout Its Life.

Not Afraid Of Deep Discharge.
No Battery Can Withstand Strong Discharges, And For Some Modifications, This Factor Is Only Destructive. For Standard Power Supplies, Frequent Discharges Below 50% Will Seriously Affect Their Capacity. Batteries Cannot Be Stored In This State. In The Case Of AGM Types, They Can Withstand 20 Percent More Energy Loss Than Conventional Batteries Without Causing Serious Damage. This Means That Repeated Discharges Up To 30% Will Not Affect AGM Battery Performance.

Not Afraid To Flip.
Because The Battery Is Sealed, The Electrolyte Does Not Pour Out Of The Battery When It Is Flipped Over. The Electrolyte Is Adsorbed By The AGM, Preventing It From Moving Freely Under The Influence Of Gravity. However, Do Not Store Or Operate Batteries Upside Down. The Reason For This Is That, When Upside Down, The Exhaust Valve Is Located At The Bottom Of The AGM Tech Battery And The Excess Gas Cannot Be Naturally Discharged Through The Exhaust Valve.