Place of Origin : Gangdong,China
Post Date : 01-04-2024
Expiry Date : 07-03-2025

In Plastic Mold Steel, DIN 1.2738 Is An Alloy Tool Steel With Excellent Toughness, Corrosion Resistance And High Hardness, Also Known As P20+Ni Steel. Its Various Excellent Properties Are Mainly Obtained Through Various Process Technologies. This Article Will Learn More About Some Technological Processes And Specifications Of 1.2738 Steel In Our Songshun Steel Plant Under Normal Circumstances.

Preheating Process
Preheating DIN 1.2738 Can Relieve Internal Stress, Uniform Temperature Distribution And Improve The Machinability Of The Material. First Put The Material Into The Preheating Furnace, Usually The Standard Preheating Temperature Is 500°C €“ 600°C, And Then Hold It For A Period Of Time, The Holding Time Is 30 Minutes/inch, The Specific Specification Is Determined According To The Thickness And Specification Of The Material.

Forging Process
The Supply State Of Die Steel DIN 1.2738 Is Generally Hot Rolled Or Forged. After The 1.2738 Die Steel Is Preheated, It Is Forged To Improve The Structure And Performance Of The Steel. Usually The Forging Temperature Ranges From 950°C To 1050°C. The Temperature Needs To Be Strictly Controlled During The Forging Process To Ensure Good Plasticity And Deformation Properties Of The Material.

(1)Thermal Processing Specifications: Start Temperature 1050°C, End Temperature 850°C, Furnace Cooling.

(2) Quenching Specifications: Usually The Preheating Temperature Is 500~600°C, Keep It Warm For 2-4h, Then Raise It To 850~880°C, Keep It Warm For =2h, Cool It To 50~100°C With Oil, Then Air Cool It, The Hardness Is 50~ 53HRC, In Order To Prevent Quenching Cracking Should Be Tempered Immediately. Quenching Increases The Hardness And Wear Resistance Of DIN 1.2738.

(3) Annealing Specifications

Normalized Annealing: For Some Applications Requiring Higher Hardness, Normalized Annealing Can Be Performed. Heat 1.2738 Steel To 870°C-900°C, Keep It For A Period Of Time, Then Take It Out Of The Furnace And Cool It To Room Temperature Quickly.
The Softening Annealing Temperature Is 710-740°C.
Air Cooling Annealing Temperature Is 780°C-820°C.
(4) Hardening And Tempering: DIN 1.2738 Steel Can Be Hardened And Tempered, Which Can Reduce Its Brittleness And Increase Toughness, Hardness And Wear Resistance. After Quenching, The 1.2738 Steel Is Cooled To Room Temperature And Tempered. The Steel Is Heated At 150°C-250°C, Kept For A Period Of Time (usually 2-4 Hours), And Then Naturally Cooled.

Surface Treatment Process
After Heat Treatment To DIN 1.2738, Surface Treatment Is Carried Out According To Customer Requirements. AISI P20+Ni / DIN 1.2738 Steel Can Be Polished, Polished, Etc. To Improve Its Surface Finish And Quality; Through Electroplating, Spraying, Etc., To Improve The Corrosion Resistance And Aesthetics Of The Workpiece; Through Sandblasting, Electric Sparks, Etc., To Improve Its Surface Is Rust-resistant.

Processing Technology
To Meet The Requirements Of The Final Product Of 1.2738 Steel, Rough Machining And Fine Machining Can Be Carried Out To Achieve Higher Precision And Surface Quality. Including Trimming, Milling, Boring, Turning, Stretching And Other Processing Methods.

The Process Of Producing DIN 1.2738 Steel Requires The Use Of Various Techniques, Which Is A Delicate And Complex Process. In Songshun, Through Continuous Improvement Of Production Technology And Standardization Of Each Process Flow, Production Efficiency And Quality Are Improved, And Customers Are Provided With The Highest Quality 1.2378 Steel.

1.2738 Steel Price /P20+Ni Steel Price Supplied By Songshun:

Thickness Below 119mm:

Price For 10~50 Tons: FOB Shenzhen USD 840/ton

Price For 50~100 Tons: FOB Shenzhen USD 825/ton

Price Above 100 Tons: FOB Shenzhen USD 800/ton

Thickness 119-149mm:
Price For 10~50 Tons: FOB Shenzhen USD 940/ton
Price For 50~100 Tons: FOB Shenzhen USD 925/ton
Price Above 100 Tons: FOB Shenzhen USD 880/ton
Thickness 150-181mm:
Price For 10~50 Tons: FOB Shenzhen USD 980/ton
Price For 50~100 Tons: FOB Shenzhen USD 965/ton
Price Above 100 Tons: FOB Shenzhen USD 945/ton

Songshun Specialized In Special Steel For Almost 20 Years. We Can Supply Mold Steel, High Speed Steel, Alloy Steel, Free Cutting Steel And Etc.Welcome Your Contact 24 Hours A Day!!!
E-mail:jacklu@songshunsteel.com
Skype/Whatsapp/Wechat:+86-18269260283
Songshun Tiktok:songshunsteelfactory
Songshun Facebook:Songshun Steel
Songshun Twitter:Songshun Steel
Songshun YouTube:SONGSHUN STEEL
Songshun Company Website:https://songshunsteel.com/
Songshunsteel20240115