Place of Origin : Guangzhou,China
Post Date : 08-01-2021
Expiry Date : 08-01-2021

Here, Let's See How To Make A Baby Book.

White Space:
1. The Definition Of White: That Is, Between Stickers And Stickers Or Between Stickers And Text, Etc., Need To Use Glue Bonding, So That It Becomes A Three-dimensional Structure Of The Position Called White, The White Place Can Not Ink, Convenient Adhesive.
2. How To Do White Space: When Doing White Space, A). Be Sure To Have An OK Sample Book (such As A White Sample, Color Sample Or Blue Sample), Draw Out The Outer Frame Of The Paste Position With Red Strokes, And Then Remove The Stickers In The Sample Book One By One. B). Place It Under The Beer Line Film, Set The Color Level And Position It With Double-sided Adhesive Tape. C). Indent Each Side Of The Outer Box Of The Sticker By About 3.5mm, Draw A Box, And Draw A Diagonal Line Inside The Box To Indicate "white Space". The White Space On The Text Is The Same As That On The Sticker! D). After Completing All The White Spaces, Make Sure To Hand In A Set Of Blue Paper In The Printing Room, Make A Blue Paper Pattern, Confirm Whether The White Spaces Are Wrong, And Modify The Incorrect White Spaces Until There Is No Problem.

Mark The Hole Position Of Printing Line Or Marking Nail:
1. The Purpose Of Printing Line And Nail Hole: Three-dimensional Book Sticker On The Book Block, Convenient Positioning, Improve Work Efficiency.
2. Printing Line:
A). Indent The Two Ends Of The Sticky Paper (i.e. The Inside Of The Two Ends Next To The Position Of The Card Pressing Line And The Position Of The Glue Water) Into 1mm Respectively, Indent About 1mm At The Side Of The Sticky Paper Pressing Line, And Draw A-line (or Point) With A Length Of 2mm At Each End;
B). Printing Line (printing Point) Needs To Be Printed.
3. The Practice Of Pinhole:
A). Paste One Nail Hole At Each Sharp Corner Of The Paper On The Text;
B). This Nail Hole Does Not Need To Be Printed. After Marking "+" On The Beer Line, It Shall Be Made On The Beer Mold.