Place of Origin : Wenling,China
Post Date : 20-10-2022
Expiry Date : 20-10-2022

Fine Polishing Is The Process Of Generating A Reflective Surface. Typically, Polishes Are Created By Using Micron Or Sub-micron Abrasive Particles In Combination With A Liquid. Polishing Is A "wet" Process. The Polishing Process Usually Uses A Pad To Hold The Abrasive, So Polishing May Not Be A "loose Abrasive Process". The Material Removed During Polishing Is Very Small, Usually Measured In Microns. The Surface Finish Of The Workpiece To Be Polished Must Be Of High Quality Prior To Polishing, So Pre-polishing Is Often A "grinding" Surface.

Types Of Fine Polishing And Fine Finishing

Mounted Flap Wheels
Micro-Mini Unmounted Flap Wheel
Non-woven Flap Wheel (Full)
Non-woven Flap Disc (Full)
Wool Polishing And Finishing
Sandpaper Disc
Flap Wheel (Slashed)
Spiral Band

Features Of Fine Cut Polishing Compound And Finishing
Polishing Purpose: Fine Grinding And Polishing; During This Processing, Usally The Depth Of The Whole Metalmorphic Layer Is Abut 3 µm And Less.

Abrasive Materials: Fine Abrasive Particles And Materials That Make The Abrasive Particles Have A Very Fine Effect On The Workpiece;

Machining Fluid: Provides Abrasive, Chip Removal, Cooling And Unnecessary Friction Reduction Effects


Applications Of Fine Polishing And Finishing