Place of Origin : Wenling,China
Post Date : 20-10-2022
Expiry Date : 20-10-2022

It Is Used For Aggressive Grinding On Hard Materials With Poor Thermal Conductivity, And The Removal Rate Is The Highest. Due To The Self-sharpening Of Ceramic Oxide Particles, The Performance Has Been Very High.

Aluminium Oxide Ceramic Flap Wheel With Shank (CAO) Grit Size Table Corresponding To Raw Materials

Aluminium Oxide Ceramic Flap Wheel (CAO) Specification
Max. RPM: 6120~76300 RPM

Other Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC), Zirconia(ZR)

Grit Size(Ceramic Aluminum Oxide Combined): 80#/120#

Aluminium Oxide Ceramic Flap Wheel (CAO) Materials That Can Be Worked:
Aluminum

Cobalt-based Alloys

Other Non-ferrous Metals

High-temperature-resistant Materials

Nickel-based Alloys (e. G. Inconel And Hastelloy)

Bronze

Hard Non-ferrous Metal

Titanium

Copper

Soft Non-ferrous Metal

Brass

Stainless Steel (INOX)

Grey/nodular Cast Iron (GG/GJL, GGG/GJS)

Annealed Cast Iron

Steel, Cast Steel


Flap Wheels With Shank
Flap Wheels With Shank Is Suitable For Grinding Small Area, Dead Angle, Inner Hole Surface, And Slit Gaps That Are Difficult To Reach. The Features Of The Abrasive Clothes Are Various With Multipurpose Application Capacity. It Is Flexible And Rich In Tensile Strength. It Could Remove The Burr And Uneven, Rough Surface With Fast Grinding Force Efficiently, Meanwhile, Can Make Sure The Performance Result Achieve A Slightly Finer Surface. It Is A Good Product For Pre-painting Or Mirror Finishing Preparation Procedures.

Advantages:
High Flexibility To Optimum Adaptation To Contours

Steady High Stock Removal Through The Entire Tool Life And Aggressive Coated Abrasive Resin Is Freed Up Constantly

The Design Of Opening Spaces And Flat Bonded Make The Abrasive Tools Can Process A Face-down Position, So Can Touch Closely To The Edges And Corners.

Aluminium Oxide Ceramic Flap Wheel (CAO)Applications:
Leveling

Deburring

Surface Work

Weld Dressing