Place of Origin : Shanghai,China
Post Date : 29-12-2020
Expiry Date : 29-12-2020

Description Of Hot Rolled Steel Strip
Hot Rolled Steel Strip Generally Refers To A Coiled Steel Strip Having A Thickness Of 1 To 20 Mm, And The Width Is Generally 600 To 2000 Mm. The Hot Rolled Steel Strip Can Be Used Directly As A Hot Rolled Steel Sheet, Or A Cold Rolled Strip Can Be Supplied As A Billet. Widely Used In Automotive, Electrical, Chemical, Shipbuilding, And Other Industrial Sectors, But Also As A Billet For Cold Rolled, Welded Pipe, Cold-formed Steel Production. Strip Hot Strip Mill Is The Main Equipment For Producing Hot Rolled Steel Strip, Which Has The Advantages Of High Production Efficiency, High Output, And Good Quality.

Production Procedure Of Hot Rolled Steel Strip
The Slab Is The First Production Material Of The Rolling Of Hot Rolled Steel Strip And The Surface Cleaning Can Be Manually Or By A Scarfing Machine With Running The Oxyacetylene Torch. The Treatment Of The Slab Is Pushed Or Walked Over The Wide Side Through A Heating Furnace With A Dimension Of 13 Meters By 30 Meters In Diameter. These Furnaces Have The Advantage Of Not Creating Cold Streaks And Slippage On The Slab. As With Flat And Thick Plates, The Preheating Temperature Is Approximately 1,250°C. After Roughing, When Needed For Metallurgical Reasons, It Goes Into The Long (about 140 M) Roll In Front Of The Finishing Mill For Cooling. When The Slab (at A Speed Of About 20 Meters Per Minute) Enters The Finishing Mill Line, Crop Shear Cuts Off The Head And Tail, And High-pressure Steam Jets Remove The Secondary Oxide Coating Formed During The Rolling Process. The Strip Is Then Rolled To A Final Thickness Of 1.5 To 10 Mm By Six To Seven High Finishing Mill Stands.