Floating Seal Installing Tools - [ Sell Product ]

Place of Origin : Xiqing,China
Post Date : 03-01-2024
Expiry Date : 14-06-2028

Trade Description

Duo Cone Seal Installer Tool And Suitable Installation Procedure Are Highly Recommended For Series Production And Maintenance Work. Installation Process Has A Significant Impact On Seal Performance, And Diameters Up To 1105mm Installation Tools Are Available For Different Mechanical Face Seals.

Before Installation, Arrange A Cleaned Seal, O-ring & Housing And Free From Any Mechanical Damage And Dent. Cleaning The Seal Using Lint Free Wipe And Ensure The Seal Face Be Thoroughly Cleaned And No Fine Particles Of Dust Should Remain On It.

Place The O-ring On The Metal Seal Ring At The Bottom Of The Seal Ring Ramp And Against The Bottom Of The Seal Ring Ramp And Against The Retaining Lip And Then Check It Is Properly Sleeved. Make Sure The O-rings Are Straight On The Rim And Not Twist Or Squeeze.

Engage The Lip Of The Duo Cone Seal Installation Tool Between The Gap Of O-ring And Seal Face Inside The Circular Guide Way Groove Of The Tool, And Bring The Edges Of Clamp Close To Each Other.

Press The Seal Ring Into The Housing Like A Snap Fastener, And Press The Fixture With Even Load On The Guide Plate. Small Rings Can Be Manually Fixed, However For Big Rings Apply Even And Gentle Pressure Around The Rim Of Guide Plate Using Wooden Mallet.

Ensure That Afterwards The Housing Face Is Parallel To The Seal Face, And O-rings Must Not Undulate In The Housing Bore Or Kink And Bulge Out Of The Bore. Ensure The Clearance Between The Seal Ring Housing Bores With FUYOTE Engineer.

^{Company Inforamtion}