Place of Origin : Ruian,China
Post Date : 05-11-2019
Expiry Date : 19-07-2044

This Slitter Is Rewinding With Slip Shaft, Slitting Accurately And Rewinding Smoothly.

HCH2-1300 High Speed Slitting Machine With Slip Shaft
This High-speed Slitting Machine Use Slip Shaft In Unwinding. It Is An Ideal Slitting Machine For The High Demand Of Speed And Precision.

Features Of HCH2-1300 High Speed Slitting Machine With Friction Shaft
USE:
This Type Label Stock Slitter Rewinder Is The Ideal Processing Machine For High Demand Of Speed And Precision.

It Is Applicable To PE, PP, PET, PVC And Other Plastic Film, Paper, Composite Film, Aluminum Film, Color Film, All Kinds Of Adhesive Tape And Label.

It Is The Ideal Model Of Film,thin Film Processing And Color Printing Company Especially Electronic Products And Up-market Boutique Packaging Products.

Characteristic:
This Adhesive Sticker Slitter Rewinder Adopted Slip Shaft Based On The Model HCH1-1300 High Speed Slitting Machine,which Can Achieve The Perfect Fixing For Different Kinds Of Materials Rewinding,can Reduce The Cost Waste Occurred Because Of The Irregular Rewinding,slitting Cutoff,off-roller.

Two Servo Motors Independently Control The Unwinding And 2 Pcs Slip Shafts Rewinding,can Insure The Tension More Better,rewinding Smoothly And Slitting Accurately.

Slip Shaft Of The Specific Role Is As Follows: Slip Shaft Is Used To Slitting The Rewinding Product Tension, The Slip Shaft Above The Slip Ring Will Be Based On The Size Of Each Roll Of Different Sizes Of Materials, Rolling, The Difference Will Be Through The Shaft With The Slippage, To Achieve A Balanced Effect Of Tension And Stability, And Finally The Performance Of The Finished Product In The Rounded Out Of The Neat, Tight Moderate, A Good Solution To The Shortcomings Of The Air Shaft (face Irregular, Very Loose, Some Too Tight Deformation). At The Same Time, The Slip Bearing Is Significant, The Maximum Shaft Can Reach 60, The Smallest Also Has 50. Under Normal Circumstances, For The Weight Of More Than 200 Kg, The Need For The Appropriate Assembly Of A Feeder, In The Protection Of The Slip Shaft Is Not Only Easy Deformation Of The Case, But Also To Facilitate The Operation Of Workers, A Person Can Operate A Slitter.