Place of Origin : Nanjin,China
The subrack of the PT-50T 5064 PCM device is 5U and is 19 inches wide. Support FXS and XFO interface, photoelectric integration. The maximum 64Kbps access capacity is 416, and the maximum E1 access capacity is 48. The PT-50T 5064 PCM device can be connected to other transmission devices via an optical transmission interface or a standard E1 interface. PT-50T 5064 PCM devices enable point-to-point, point-to-multipoint communication via E1 or fiber optics.
Features
* System Capacity
Up To 416 64K Access Channels And Up To 48 E1 Accesses;
* Interface Variety
FXS And FXO;
* Backup Function
Supports Dual Master Backup, Power Backup, Photoelectric Backup;
* Network Management Function
The Network Management Device Of The Device Can Configure The Complete Running Parameters Of The Device.
* The Device Can Be Configured As A D/I Device With Flexible Access To The Voice Channel;
* Transmission Interface;
E1 Interface And Optical Interface;
* The Cross-connection Matrix Of The Device Is 2K × 2K;
* The Network Management Port Is An Ethernet Port;
* The Firmware And Software Of The Device Have Remote Upgrade Function;
* The Power Supply Is 220VAC Or -48VDC Or 220VAC Plus -48VDC.
Technical Parameters
* Ethernet Port Meets IEEE 802.3 Related Recommendations, 10M/100M, Half-duplex/full-duplex Working Mode Adaptive;
* E1 Port Meets ITU-T G.703 Recommendation, Impedance Is 75Ω Or 120Ω, Using IDC Connector;
* The Network Management Information Is Transmitted Through The Idle Bits Of The Transmission Port, And The Local Network Can Be Cascaded Through The Ethernet Network Port;
* Power Consumption: Less Than 360W;
* Working Environment Temperature: -10 °C ∼ +50 °C, Humidity ≤ 90% (no Condensation)
* Product Size: 440mm × 221.5mm × 394mm
