Place of Origin : Nanjin,China
PT-10 1208 works as PWE3 (Pseudowire Emulation Edge-to-Edge) device, to achieve the highest interoperability, it successfully implement most TDMoIP technologies, such as MEF and ITU-T standard. It adopts RFC5087 (TDMoIP), RFC5086 (CESoPSN), RFC4553 (SAToP), MEF-8 (PDHoME) for various types of traffic handling. The built-in extra large jitter buffer up to 8s and 4s PDV (Packet Delay Variation) compensation, guaranty the precision of TDM timing reconstruction.
Features:
* 19″ Rack Mountable, 1U Height Compact Size;
* Multi-services With Voice / Data, E1 And IP Over IP Link;
* Guaranty 100Mbps Bandwidth For Ethernet Transport Over The 1.25G Fiber Optical Ethernet Uplink;
* System Provides 2 × 1.25Gbps Optical Ethernet Interface As 1+1 Protection;
* Uplink Ethernet Port With SFP/GE-T (RJ45) Electrical Module Is Available;
* Learning Bridge And IEEE 802.1q Port Based VLAN Supported On The Ethernet Switching Ports;
* Supports E1 Package QoS Assurance, Framed And Unframed;
* Additional Uplink E1 Supports 75Ω And 120Ω, User Definable;
* Two Expansion Slots For E1 / Data Or Voice Modules;
* Adjustable Transmission Delay From 4ms To 4s;
* In-band Management Channel For Remote Control And System Management;
* Complete Local And Remote Loopback Facility For System Diagnostic;
* Audible And Visible Alarm Indication For Local Or Remote Unit;
* Redundancy Power Supply Supports With Any Combination Of AC And DC Power Supply Unit.
Technical Specification:
* E1 Interface
Bit Rate: 2048Kbps ±50ppm
Code Type: HDB3 Code, G.703 Standard
Input Impedance: 75Ω Or 120Ω (user Definable)
Frame Structure: G.704, G.706
Compression Law: G.711
Level: ±2.37V ±10%
* Ethernet Uplink Optical Interface
Bit Rate: 1.25Gbps ±50ppm
Output Optical Power: ≥-15dBm
Receiving Sensitivity: ≤-35dBm
Optical Wavelength: 1310nm/1550nm
Optical Interface Connecter: SFP/LC
* Ethernet Uplink Electrical Interface
Bit Rate: 1000Mbps, Full Duplex
Connector: SFP/GE-T (RJ45)
* ETH Interface (10/100BASE/TX)
Interface Rate: 10/100Mbps, Auto
Standard: IEEE 802.3, IEEE 802.1Q (VLAN)
Connector: RJ45
* Mechanical Dimension
Dimension: 440mm (W) × 270mm (H) × 44mm (D)
Net Weight: 4Kg
* Power Supply
Input Voltage: -48Vdc And/or 220Vac
Voltage Range: -36Vdc ∼ -72Vdc, 165Vac ∼ 265Vac
Power Consumption: <10W
* Operation Environment
Working Temperature: -10°C ∼ 50°C
Working Humidity: ≤90% (non Condensed)
