1 Fiber DVI Optical Extender - Product
Place of Origin : Shenzhen,China
Delivery Terms : 7 Days
Delivery Time : 2 Working Days
Product Capacity : 2000 Pairs Per Month
Payment Terms : T/T
Product Description
1 Fiber DVI optical extender is a fiber optic transport system capable of distributing high resolution DVI signals over a single optical fiber with cable lengths up to 300 meters(OM3 MM fiber) or 10km(SM fiber), the resolution up to 1920 x 1200 @ 60 hz. Connect the transmitter before use on the monitors will be used, click on the transmitter key, to read and write EDID will be read and stored in the display inside the transmitter.
Basic Information
Brand : Beyond
Material : Aluminum
Color : Black
Expiry/Validation Period : 5 Years
Physical Specification
Size or Volume : 63*53*22mm
Weight : 1KG
Other Specification : The DVI Over Fiber Convertor Support Various High Definition Resolution Ratio Transmission, The Highest Can Be Reach UXGA 1600*1200 Or WUXGA 1920*1200@60Hz Or HDTV 1080P 1920*1080@60Hz, 2048x1080,max Bandwidth 11Gbps.
SPECIFICATION
Opitcal：
Wavelength
850nm &1310nm
Output Power
-8~-3dBm
Optic Fiber
OM3 Multimode ，9/125u Single Mode
Rx Sensitivity
-16dBm
Optical Connector
1 X LC
Distance
0~300M (OM3 MM) / 0~10KM (SM)
Video:
DVI Input/Output
Output Video
DVI 1.0
Input Video Signal
0.5～1.0V P-P
Input Signal DDC
5V P-P (TTL)
Connector
18+1 DVI Male
General：
Input Power
5 V DC
Power Consumption (maximum)
2.4W(max)
Operating Temperature
-20°C To 70°C
Storage Temperature
-40°C To 85°C
Operating Humidity
0 ~ 95% (non-condensing)
Net Weight
190g Per Pair
Case Material
Aluminum
Product Size
64mm×52mm×22.5mm( L/W/H)
Equipment Installation And Operation
Step 1:Turn On The PC And The Monitor Power.
Step 2: Read The EDID Monitor, Read Methods Please Follow The Steps Below:
(1) Open The Monitor Power Supply First, Then Connect The Transmitter DVI Interface Launch To The DVI Interface Display Device.
(2) Connection Is Complete, Then Connect The Power Of The Transmitter, Ensure The Power Light Red LED Lights Up.
(3) Press The Transmitter EDID Read/write Button, The EDID R/W Light Lights Up, Says It Is To Read The EDID Information Display Device. Indicator Light Goes Out After 10 Seconds Said Read EDID Information Is Completed, Switch Off The Power Of The Transmitter.
Power And EDID W/R Lamp State: Power Supply To Emit Red Light, Read And Write EDID Red Green Dichromatic.
Note: If A Change In Another Display Device, Please Do The Second Step Again.Step 3: Connect The Transmitter DVI Interface To The PC Of The DVI Interface, The EDID Will Shining Lights, Put Out After 2 Seconds.
Step 4: Will The 5 V Power Adapter To Connect To The Receiver, To Ensure That The Power Light Red LED Ligh
