Dark Green 1.75MM ABS 3D Printing Filament printer material , 2.2lb / Spool - Product
Place of Origin : Shenzhen,China
Delivery Time : 3-10days
Product Description
Dark Green Color,1.75mm ABS 3D Printing Filament, 1KG(2.2lb)/Spool
Quick Detail:
1. 3D printer material, ABS filament
2. 1.75mm, Dark Green color (24 colors available)
3. Filament weight: 1kg/spool
4. 1kg/spool; 12spools/carton
5. Suitable for Makerbot, UP, Cubify, Leapfrog, Reprap, Ultimaker and any other FDM 3D printers
Description:
ABS (Acrylonitrile butadiene styrene) is an oil based filament and has a higher melting point than PLA. It is a plastic that is non-soluble and can
Physical Specification
Other Specification : Dark Green Color,1.75mm ABS 3D Printing Filament, 1KG(2.2lb)/Spool
Quick Detail:
1. 3D Printer Material, ABS Filament
2. 1.75mm, Dark Green Color (24 Colors Available)
3. Filament Weight: 1kg/spool
4. 1kg/spool; 12spools/carton
5. Suitable For Makerbot, UP, Cubify, Leapfrog, Reprap, Ultimaker And Any Other FDM 3D Printers
Description:
ABS (Acrylonitrile Butadiene Styrene) Is An Oil Based Filament And Has A Higher Melting Point Than PLA. It Is A Plastic That Is Non-soluble And Can Easily Be Treated With Sandpaper Etc. ABS Are Used In A Lot Of Products In Our Daily Life. Most Of All Plastic Boxes And Toys Are Made Of It.
3D Printer Is Also Known As Rapid Prototyping. It Is Already Widely Used In Health Care, Education, Toys, Building, Automobile, Electronics, And Anime Field. ABS Filament Is Commonly Used In 3D Printing, Has The Following Characteristics:
1. ABS Softer Than PLA, But High Strength, Good Toughness;
2. Density Is Small, When Printing Larger Volume Model Lighter, Save Money;
3. Cost-effective, Can Be Processed In Wide Range Temperature;
4. Accurate Diameter: 3.0/1.75mm, Variations + /-0.1mm,roundness +/-0.05mm;
5. Suitable For A Variety Of 3D Printer, Makerbot, UP, Cubify, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Huxley, BFB Series, Etc.
Specifications:
- - - -
Material | ABS |
Color | Dark Green |
Diameter | 1.75mm |
Weight Filament | 1kg |
Print Temperature | 210 - 250oC |
Compatible With | Makerbot, UP, Cubify, Leapfrog Creatr, Builder, Felix, Reprap, Ultimaker And Any Other FDM 3D Printers |
Package | 1kg/spool; 12spools/ctn Sealed Plastic Bag With Desiccants |
- - - -
Our Advantages:
1. High Quality: Absolutely Round Shape, Accurate Diameter, No Bubble, High Tenacity And Stable Melting Point.
2. Superb Multiple Color: Up To 24 Colors For Choi