Place of Origin : Dezhou,China
Technical Specifications for Mechanically Woven Double Twisted, Hexagonal Shaped, Zn + PVC Coated Steel Gabions and Gabion Mattress for River Training works
Zinc + PVC Coated Steel Mesh Gabians for River Training Work for India Project
Gabion Mesh Wire:
All Tests On The Mesh, Lacing Wire And Selvedge Wire Are Made Prior To Manufacturing The Gabion Mesh.
Tensile Strength:
The Wire Used For The Manufacture Of Mesh Shall Have A Tensile Strength Minimum 350 N/mm2 In Accordance With EN 10223-3. Wire Tolerances Are In Accordance With EN 10218 (Class Tl).
Elongation:
Elongation Shall Not Be Less Than 10%, In Accordance With EN 10223-3. Test Must Be Carried Out On A Sample Of At Least 25 Cm Length.
Internal Connecting Wires (Cross Ties/ Stiffener Wire):
Diameter 2.2 Mm, Zinc Coated Wire With PVC Coating, 3.2mm When Measured With PVC Coating.
Zinc Coating
Zinc Coating: Minimum Quantities Of Zinc Shall Meet The Requirements Of EN 10244-2
Adhesion Of Zinc Coating: The Adhesion Of The Zinc Coating To The Wire Shall Be Such That, When The Wire Is Wrapped Six Turns Around
A Mandrel Having Four Times The Diameter Of The Wire, It Does Not Flake Or Crack When Rubbing It With The Bare Fingers In Accordance With EN 10244.
PVC (Polyvinyl Chloride) Coating (UV Stabilized)
PVC Coating Thickness: Nominal - 0.5 Mm, Minimum - 0.38 Mm
Specific Weight: 1.3 Kg/dm3 - 1.35 Kg/dm3 In Accordance With ISO 1183
Hardness: Between 50 And 60 Shore D, According To ISO 868
Tensile Strength: Higher Than 21 MPa, According To ISO 527
Elongation At Break: Not Less Than 200% In Accordance With ISO 527
