Addition cure silicone rubber for artificial stone products - Product
Place of Origin : Shenzhen ,China
Delivery Terms : UPS,EMS ,by Sea,by Air
Delivery Time : Within 3 Days After Payment Confirmed In Our Bank.
Product Capacity : 8000kg/day
Payment Terms : L/C,T/T
Product Description
Addition cure silicon rubber for artificial stone products Advantages:
Flexible, high and low temperature resistance, resistance to ultraviolet radiation, environmental protection, water repellent, good air permeability, good insulation, shrinking smaller.
Addition cure silicon rubber for artificial stone products Package and storage :
1. 20kg or 200kg /drum.
2.It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.
Basic Information
Brand : Hong Ye Silicone Rubber
Model : HY-E635
Material : Silicone Rubber
Color : Translucent
Physical Specification
Other Specification : Addition Cure Silicon Rubber For Artificial Stone Products Typical Datasheet :
Item No: HY-E635 Color: Translucent Hardness (A°): 35±2
Viscosity (CS): 8000±2000 Tensile-strength( Kgf /cm2 ):≥60 Tear-strength (kgf /cm2): ≥13
Elongation-break(%): ≥400 Mixing Ratio Of Silicone And Catalyst: 1:1
Addition Cure Silicon Rubber For Artificial Stone Products Advantages:
Flexible, High And Low Temperature Resistance, Resistance To Ultraviolet Radiation, Environmental Protection, Water Repellent, Good Air Permeability, Good Insulation, Shrinking Smaller
Addition Cure Silicon Rubber For Artificial Stone Products Points Of Attention:
1,Prone To Poisoning, Can Not Mix With Condensation, Ionic Compounds Containing N, S-, P, Organic Matter And Of Sn, As, Hg, Ph., Easy Molding Plastic Poisoning, Resulting In The Phenomenon Of Not Curing.
2,Comparing With Condensation Cure Silicone, Addition Cure Silicone's Adhesive Properties To Be Worse.
3,Addition Cure Silicone Affect By Temperature Greatly When Cured Under Room Temperature.
4,Addition Cure Silicone Is Easy To Poisoning, Please Clean The Tools Which Are Used For Condensation Silicone Rubber, So That It Can Avoid Poisoning.
It’s Fobidden To Add The Pigment Or Powder To Addition Cure Silicone Rubber Arbitrarily,it’s Easy To Make The Catalyst To Be Poisoning.
5,Addition Cure Silicone Rubebr Has Two-component, The Component A And Component B, Please Pay Attention To Clean The Component A Containers Before Using For The Component B, And Vice Versa
6,In Order To Avoid The Hardness Change, We Should Mix The Component A And Component B According To Its Mixing Ratio Strictly, No Atter It’s 1 : 1 Or 10 : 1.