Thin Wall Round DIN 1626 DIN 2448 DIN 1629 Seamless Steel Tubes Hot Rolled , 6mm - 350mm - Product
Place of Origin : Suzhou,China
Delivery Time : 25~35days
Product Description
Thin Wall Round DIN 1626 DIN 2448 DIN 1629 Seamless Steel Tubes Hot Rolled , 6mm - 350mm
Quick Detail:
Standard: DIN1626, DIN1629 DIN2448
Size:(mm)
Out Dimensions: 6 mm ~ 350 mm
Wall Thickness: 0.8 mm ~30mm
Length: Fixed(6m,9m,12,24m) or normal length(5-12m)
Description:
- - - -
Commodity Specification | DIN1626 / ST52.4 / ST42.2 DIN1629 / St45-4,St52,St35,St37,St44 DIN 2448 / EN 10217 / BS 1387 |
ProcessMethod: | Cold draw or Hot roll
Physical Specification
Other Specification :
Thin Wall Round DIN 1626 DIN 2448 DIN 1629 Seamless Steel Tubes Hot Rolled , 6mm - 350mm
Quick Detail:
Standard: DIN1626, DIN1629 DIN2448
Size:(mm)
Out Dimensions: 6 Mm ~ 350 Mm
Wall Thickness: 0.8 Mm ~30mm
Length: Fixed(6m,9m,12,24m) Or Normal Length(5-12m)
Description:
- - - -
Commodity Specification | DIN1626 / ST52.4 / ST42.2 DIN1629 / St45-4,St52,St35,St37,St44 DIN 2448 / EN 10217 / BS 1387 |
ProcessMethod: | Cold Draw Or Hot Rolled |
Surface Finish: | Oiled Or Black Painted To Prevent Rust. |
Size: | A)NPS:1/8-20 B)Schedule: Sch20,sch30,sch40,STD,sch80 |
C)OD: 6 Mm ~ 350 Mm D)WT: 0.8 Mm ~30 Mm |
OD Tollerance: | D48.3mm,0.4mm/-0.79mm,D48.3-114.3mm, 0.79%,D114.3mm 1.59/- 0.79mm |
WT Tollerance: | WT 12.5% |
Chemail: | C0.3% , Si0.1%,Mn:.29-1.06%, P0.035%,S0.035%, Cu<0.4%,,Cr<0.4%,Mo:0.15%,V:0.08% |
Tenslle Strength: | 415MPA |
Yield Point: | 240 MPA |
Length: | 5.8-12m Or Above |
Ends: | Beveled Or Square Cut Plastic Caped. |
Delivery: | FOB/CIF/CFR |
Delivery Time: | According To The Customers Request. |
Application Range: | Petroleum,chemical,power,gas,water,metallurgy,shipbuilding,construction,etc. |
Others | A) Special Design Available According To Requirement. |
B) Anti-corrosion And High-temperature Resistant With Black Painting. |
- - - -
Chemical Composition:
- - - -
Standard | Grade | ChemicalComposition(%)(max) |
C | Si | Mn | P | S | Cr |
DIN1629 | St37.0 | 0.17 | / | / | 0.04 | 0.04 | / |
St44.0 | 0.21 | / | / | 0.04 | 0.04 | / |
St52.0 | 0.22 | 0.55 | 1.7 | 0.04 | 0.04 | / |
- - - -
Mechanical Proper