Tailings Recovery Machine - Product

Other Specification : Working Principle Of Forui Separation Machine-Tailings Recovery Machine: Tailings Recovery Machine Is Composed Of Five Main Parts Which Are Fines Removal Device, Magnetic Plates, Power Reduction, Chute And Body Frame. After The Pulp Flows Into The Chute From One Port Of It, The Magnetic Materials Will Be Absorbed On The Surface Of The Magnetic Plate, And The Nonmagnetic Pulp Will Be Discharged From The Other Port. Under The Action Of The Uniformly Rotation Of The Host Disk, The Adsorption Of Magnetic Minerals In The Surface Of The Disk Was Taken Out Of The Pulp Surface; Then Was Put Into The Ore Chute When Flow Into The Fine Removal Device And Finally Discharged From The Ore Chute. Advantages Forui Separation Machine-Tailings Recovery Machine: 1. Small Disk Gap And There Is Non-zero Sector Between The Disks. 2. Fines Removal Device Is Non-contact Type Compulsory Unloading Ore, The Disk Surface Have A Layer Of Fine Ore Protective Layer, Thus Prolong The Service Life And Also To Enable The Recovery Of Magnetic Minerals Improve The Grade. 3. Large Processing Capacity: It Is Specially Designed For Tailings Re-election, The Structure With The Features Of Large Dealing Capacity, High Recovery Rate Of Low-grade Tailings And Higher Efficiency Than The Drum Magnetic Separator. 4. Affected By The Magnetic Field, The Magnetic Minerals Of The Ore Pulp Can Be Fully Recovered While Flowing Through The Disk. 5. The Machine With Small Power And High Economic Benefits, Adapts Unique Magnetic Field Arrangement; The Removed Mineral Powder Shows Flow State Because It Contains Large Moisture Contents, Thus There Is No Need To Add Water Or Add Less Water.

View Profile