Reinforcing Bar Welded Wire Mesh - Product
MINIMUM QUANTITY
100ROLLS
Place of Origin : Anping,China
Delivery Time : 15days
Product Capacity : 1000rolls/week
Payment Terms : TT, L/C/ Or Others
Product Description
steel Bar Welded Wire Mesh /cold roll with rib reinforcing bar
ISO9001: 2008, UKAS
Opening: 75mm ~ 300mm
Length: 1m ~ 14m, width: 1m ~ 3m
Wire diameter: 5mm ~ 16mm
Steel Bar Welded Wire Mesh Panel is made of superior quality steel bar, with flat even surface, firm structure. This process technology is one of the ten new construction technology in 2005. It is widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, wall, etc.
Basic Information
Brand : Weian
Material : Steel Bar
Expiry/Validation Period : 30days
Physical Specification
Size or Volume : Below And Equal 14*3m
Other Specification : Features Of Reinforcing Mesh
A Deformed Wire Pattern (curry Pattern): Offers Superior Bonding, Improved Stress Distribution And Crack-width Control
B Ferro-Fabric: Is Available In A Wide Range Of Diameters And Apertures. The Products Can Be Bent To Shape As Required
Raw Material:
Hard Drawn Wire (smooth) And Cold Rolled Wire (deformed)
All Intersections Are Resistant-welded Thereby Not Reducing The Tensile Strength Of The Wires
Mesh Has An Average Shear Strength Equal To 80% Of The Wire Strength
The Wire Used Has Physical Properties Which Are Rigidly Controlled To Produce Mesh With Maximum Weld Strength Combined With Ductility
The Steel Specifications Allow For Cold Rolled Wire With A Minimum Ultimate Tensile Strength Of 510Mpa And A High Resistance To Fatigue Finished
Mesh Is Available In Black (pre-galvanised) And Galvanised Sheets Or Rolls
Also Available On Request: Plastic Coated And Hot Dipped (galvanised) Mesh
Quality Control
Reinforcing Mesh Is Produced To Highest Quality Standards And Complies To ISO 9001. Thorough Testing Of Wire Strength, Welds And Aperture Sizes Is Continuously Performed At All Stages Of The Manufacturing Process. Final Inspections Ensure That Highest Standards Are Maintained.
Standard Sizes
Reinforcing Mesh Is Available In Rolls (60m X 2, 4m) And Sheets (6m X 2, 4m), Manufactured According To Standard Sizes. Wire Diameters Vary From 3, 55mm To 12mm. Mesh Aperture Can Be As Small As 100mm X 100mm.
Special Mesh
Specialized Machinery Is Used To Produce Weld Mesh With Non-standard Aperture Sizes. The Spacing Of Wires In Either Direction Is Variable Between 25mm And 150mm. Customized Mesh Is Available On Request According To Specifications Provided.
The Reinforcing Mesh Data Sheet
Standard Sizes Of Welded Mesh Fabric
Specifications: Sheets: 6m X 2, 4m Or Rolls: 60m X 2, 4m