Polished automotive Investment castings of Motor drive shaft CF8/SS304 - Product

Other Specification :  Quick Detail: # # Drive Shaft Of A Motor, Material Is SS304/CF8. # Surface Highly Polished To Reduce Friction And Heat. # Manufactured By China Foundry Supplier With Lost Wax Process; # Max Size: 500X500X350mm; # Max Weight: 80kg; # Chemical Composition Tested By German Spectrometer; # ISO9001:2008 Certificated; # NDT Test Available. Description: Highly Polished Investment Casting Shaft Made Of Stainless Steel With Polishing Surface. Winnington Has Experience Of Investment Casting For The Industries Of Pump, Valve, Marine, Electronics, Medical, Automotive, Machinery Etc. We Cast A Wide Range Of Materials: Stainless Steel, Carbon Steel, Duplex Alloys, Nickel-based Materials, And More: - - - - Stainless Steel (70%) | Carbon Steel | Alloy Steel | CF3M (AISI 316L), CF8M (AISI 316), CF8 (AISI 304),CD4MCu, CD4MCuN,ANC20,1.4408,1.4517, 1.4306, 303, 430, 420, 17-4PH, SCS1 And More | SCS16, SCS14, SCS13, 1.0619, WCB, S355JR, 1045 , LCC And More | ANC2,CLA12C,42CrMo,8Q,4140,6150 And More | - - - - Investment Casting (or) Lost Wax Method A Wax Duplicate Of The Desired Casting Is Created To Be Invested Into A "Ceramic Slurry". The Slurry Covered Investment Can Be Dipped Into Alternating Coatings Of Sand And Slurry Until A Suitable Thickness Of Shell Is Achieved That Can Hold The Molten Metal After The Investment Is Burnt Out. The "Burn-Out" Process Requires That The Investment And Coating Are Inverted In An Oven That Is Fired To 1800F So That The Investment Can Flow Out And Be Recovered. The Refractory Coating Is Also Cured In This Procedure. This Process Is Beneficial For Casting Metals With High Melting Temperatures That Cannot Be Moulded In Plaster Or Metal. Parts That Are Typically Made By Investment Casting Include Those Wi

View Profile