CF8M Ceramic shell Precision Casting parts for valve firefighting industry - Product
Place of Origin : Huizhou,China
Delivery Time : 30-90 Days
Product Description
Ceramic shell Precision Casting parts for valve in firefighting industry CF8M.
Quick Detail:
# DN40 valve body for firefighting industry - Investment casting part manufactured by Winnington with ceramic shell casting process;
# Casting type: silica sol lost wax process;
# PED/AD2000 certificated;
# Chemical composition tested by German spectrometer;
# X ray test service available.
Description:
Stainless steel investment castings weight from 10g to 80kg, electro polishing or vibration pol
Physical Specification
Other Specification :
Ceramic Shell Precision Casting Parts For Valve In Firefighting Industry CF8M.
Quick Detail:
# DN40 Valve Body For Firefighting Industry - Investment Casting Part Manufactured By Winnington With Ceramic Shell Casting Process;
# Casting Type: Silica Sol Lost Wax Process;
# PED/AD2000 Certificated;
# Chemical Composition Tested By German Spectrometer;
# X Ray Test Service Available.
Description:
Stainless Steel Investment Castings Weight From 10g To 80kg, Electro Polishing Or Vibration Polishing Finish Available.
Winnington Casting Perform Steel Investment Casting In A Wide Variety Of Alloys, Please Refer To Below Table For The Most Common Material That Winnington Can Cast:
- - - -
Stainless Steel (70%) | Carbon Steel | Alloy Steel |
CF3M (AISI 316L), CF8M (AISI 316), CF8 (AISI 304),CD4MCu, CD4MCuN,ANC20,1.4408,1.4517, 1.4306, 303, 430, 420, 17-4PH, SCS1 And More | 1020, SCS16, SCS14, SCS13, 1.0619, WCB, S355JR, 1045 , LCC And More | 42CrMo,8Q,ANC2,CLA12C,4140,6150 And More |
- - - -
Investment Casting Process:
# Wax Die Making: Our Wax Tooling Is Made Of Aluminum Which Is Easy For Machining And Fast For Cooling, At The Same Time, Light For Handling.
# Wax Injection: Filling The Entire Mould With Molten Wax, And Let It Cool, Until A Desired Wax Pattern Is Shaped And Harden.
# Assemble The Wax Patterns: The Wax Patterns Are Welded To A Runner System By A Heated Metal Tool According To A Certain Pattern Cluster(tree) Design.
# Investment: The Ceramic Mould, Known As The Investment, Is Produced By Three Repeating Steps: Coating, Stuccoing, And Hardening. The First Step Involves Dipping The Cluster Into A Slurry Of Fine Refractory Material And Then Letting Any Excess Drain Off, So A Uniform Surface Is Produced. This Fine Material Is Used First To Give A Smooth Surface Finish And Reproduce Fine Details. In The Second Step, The Cluster Is Stuccoed