DX68 Hose Crimping Machine - Product
Place of Origin : Shanghai,China
Delivery Terms : 10 WORKING DAYS
Delivery Time : 10 WORKING DAYS
Product Capacity : 100 PER MONTH
Payment Terms : T/T OR L/C
Product Description
hose crimping machine ,hydraulic hose crimping machine ,hose crimperDX68.is low price,Reliable quality.
.
Model DX68 hose crimping machine is used for buckling processing for high pressure rubber pipe .
Model DX68 hose crimping machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It can also be used for buckling the two-way bends, especially large bends and irregular shape bends.
This machine features small and portable appea
Basic Information
Brand : Tuole
Color : BLUE
Expiry/Validation Period : HALF AN YEAR
Physical Specification
Size or Volume : 670(L)×490(W)×780(H)mm
Other Specification : DX68-B Type Lock The Machine Compact Portable, Power, Low Noise, Easy Operation. The Withholding Amount By Scale Precision Adjustment. Suitable For Mechanical Engineering Of High Pressure Hose Assembly Buckling Processing, Can Also Be Withheld Bidirectional Elbow, Elbow And Large Shaped Head.
In Two, The Main Technical Characteristics
Burke: 6 Dia - Than 51mm
Maximum Clamping Force: 400 Tons
Scale Accuracy: 0.02mm
Rated Pressure: 31.5MPa
Oil Pump Displacement: 5ml / Rad ( 380V ) 2.5ml / Rad ( 220V )
Dimensions: 670 ( L ) X 490 ( W ) X 780 ( H ) Mm
DX68-B Type Lock The Machine Structure
Three, Installation And Use
1, Plus Enough Clean 46 # Anti-wear Hydraulic Oil 70 Litre, Such As Room Temperature Below 10 Degrees, The Need To Add 10% Transformer Oil.
According To The Requirement Of Machine Connected To The Power Supply, So That The Motor Rotation Direction And The Rotation Motor To Sign Agreement, And Grounding Protection.
In 2, An Adjusting Gauge
The Ruler Is Used To Adjust The Size Of The Withholding Amount. Adjusted Clockwise Withholding Amount Decreases, Reverse Adjust Withholding Amount Increases. Scale By Scale Seat On The Three Inner Six Angle Screws And Three Spring And Cylinder Cover Are Connected Together, Pull Rod ( Perpendicular To The Cylinder End Cap Direction), Should Be Able To Flexibly To Leave The Cylinder End Cover, After Being Released By The Elastic Force Of The Spring Restoration, Each Boot Check Carefully Before Scale Expansion Is Flexible, Lead If The Connection Is Reliable.
In 3, The Ruler 's Ruler Is Screwed To Side Foot 0 Line, Start Trial Operation, The Initial Use Of Should Make Machine No-load Reciprocating Movement 20-30, Check Whether The Normal Operation Of Each Component. After Each Use, Don't Start To A Very High Pressure, The Pressure Shall Be Increased Gradually.
In 4, The Pressure Adjustment
Buckling Pressure And A
