Gear Driving Rolling Shutter Strip Forming Machine6~8m/min Galvanized Steel - Product

Other Specification : Auto Fire Damper Shutter Frame Blade Louver Roll Forming Machine 1, Structure Of Equipment This Line Is Composed Of De-coiler, Punching, Forming Machine, Cutting System, Electric Control System, Etc. 2, Equipment Composing Parts Equipment Is Composed Of De-coiler, Feed System, Gap And Cut Off, Forming Machine, Collection Table, Electric Control System, Etc. 3, Technical Parameter Of Equipment Main Parts 3.1, Auto-decoiler A, Load Capacity: 2 T B, Inner Diameter Of Coil: 490-510mm Outer Diameter 1200mm 3.2. Servo Feed And Punching Unfilled Corner Parts A, Servo Motor: Used Mitsubishi Servo Motor, Power: 1.0kw B, Punching Unfilled Corner Die: 4 Pillars Punching Die C, Material Of Punching Die: Cr12. Quenching Treatment 3.3Feeding: Power 0.37kw 3, 4Forming Machine A, Forming Frame B, Material Of Forming Mould: GCr15, Quenching Treatment: Rigidity: HRC56-62 C, Motor: 7.5kw Frequency Conversion Engine 4, Electric Control: PLC System The Operator Can Do The Following The Setting Program (PLC) Monitoring The Control Process, Modify The Control Parameters, The Length Of The Workpiece Digital Setting, The Length Of The Workpiece Adjusting. Running State Real-time Monitoring Equipment And Fault Indication. 2- Mode Of Operation: Manual / Auto Two. With Manual, Automatic Switching Function: In The Manual Mode, Can Be Stand-alone Operation, Convenient Repair; In The Automatic Mode, All Production And Operation, The Start Up Sequence; Along With The Emergency Stop Button, Easy To Handle Emergencies, To Ensure The Safety Of Equipment And Personnel Main Parameter - - - - NO. | Project | Unit | Parameters | Remark | 1 | Material | Type | | Mild Steel,Galvanized Sheet | | Strengthof Material Sheet | Map | 350 | | Thickness Of Material Sheet | Mm | 0.8~1.5 | |

View Profile