Place of Origin : Cangzhou,China
Electronic Contacts Basic Structure and Materials
- Main material: Mainly H65 brass or phosphor bronze strip, thickness 0.3-0.8mm, contact pieces, springs and other parts are made by stamping.
- Surface treatment: Commonly used nickel plating (3-5µm) or tin plating (1-3µm) process, some high-end products are silver-plated.
Forming Parts Production Process Characteristics
Stamping: Use high-speed punch presses with continuous mold production, and can complete 2000-5000 stampings per hour.
Electronic Contacts Basic Structure And Materials
- Main Material: Mainly H65 Brass Or Phosphor Bronze Strip, Thickness 0.3-0.8mm, Contact Pieces, Springs And Other Parts Are Made By Stamping.
- Surface Treatment: Commonly Used Nickel Plating (3-5μm) Or Tin Plating (1-3μm) Process, Some High-end Products Are Silver-plated.
Forming Parts Production Process Characteristics
Stamping: Use High-speed Punch Presses With Continuous Mold Production, And Can Complete 2000-5000 Stampings Per Hour.
Forming Process: The Bending Angle Tolerance Is Controlled At ±2°, And Complex Shapes Are Processed Through Multi-station Molds.
Welding Method: Most Of Them Use Resistance Spot Welding Or Laser Welding To Ensure The Stability Of The Contacts.
Core Performance Advantage
Conductive Performance: Contact Resistance ≤ 20mΩ (in Accordance With GB/T 5095 Standard)
Durability: Conventional Products Can Withstand 5000-10000 Plug-in And Pull-out Cycles
Corrosion Resistance: Nickel-plated Products Pass 48-hour Salt Spray Test
