Place of Origin : Zheng Zhou,China
Payment Terms : T/T
he ladle shroud nozzle for continuous casting is also called the protective sleeve. It is an important component connecting the ladle and the tundish. It is connected to the lower shroud of the sliding shroud device at the bottom of the ladle, and the lower end extends into the tundish.
The ladle Shroud Nozzle For Continuous Casting Is Also Called The Protective Sleeve. It Is An Important Component Connecting The Ladle And The Tundish. It Is Connected To The Lower Shroud Of The Sliding Shroud Device At The Bottom Of The Ladle, And The Lower End Extends Into The Tundish.
The Shroud Is An Important Functional refractory Material For Maintaining Casting And Improving Steel Quality. The Length Of The Shroud Is Generally 600-1800mm, The Pipe Diameter Is 90-150 Mm, And The Structure Of The Ladle Shroud Nozzle Is Shown In Figure 2. Its Use Conditions Are Harsh And Must Have The Following Functions: Excellent Thermal Shock Resistance; Good Mechanical Strength; Excellent Resistance To Alternating Corrosion Of Molten Steel And Slag, High Oxidation Resistance, And In Addition, Other Suitable Properties Are Required For Some Special Steel Grades.more Information,please Check here.Monoblock Stopper is Used Mainly For Flow Control On Molten Steel Poured From Tundish To Mould. Monolithic Stopper Is Installed In The Tundish Above The Sub Entry Nozzle and The Gap Between Stopper Head And Nozzle Decide The Throughput Requirement Of Molten Steel Inside The Mould.
