Pumping Oil Circulation Mold Temperature Controller Units for Compression Casting, Laminating Presse - Product

Other Specification :  Pumping Oil Circulation Mold Temperature Controller Units For Compression Casting, Laminating Presses SAFETY PROTECTIONS: # No-fuse Breaker For The Overcurrent Phenomenon Of General Power Supply. # Motor Reversion Protection And Indicator Light Up. # Cooling Water Lacking Protection And Indicator Light Up. # Circulating Pump Overload Protection And Indicator Light Up. # BY-PASS Pressure Release Loop For Hot Oil. # Phase Failure Protection. # High-voltage Explosion-proof Device. # Anomaly Explosion-proof Buzzer. # Prevent Dry Combustion Device, Discharge Scale Deposit Protection. # No-voltage Exhaust Protection System. ADDM-18 Mold Temperature Control Units(MTC) Are Specially Custome-designed For The Temperature Control Of Compression Casting. It Has Lots Of Optional Fuctions And Multi Safety Protections. The Heating Power Is 18KW For Each Circuit And Adjustable, SPECK High-temperature Magnetic Oil Pump Is Specially Selected For This Series.2* 0.1M2 Plate Exchanger Is Available For Process Requires Heating And Cooling. This Model Belong To Dual-circuit Temperature Control, It Offers The Temperature Range From 25C To 350 C. SPECIFICATION DETAILS: - - - - No. | Part | Specification | Data | 1 | | Model | ADDM-18 | 2 | | Power Supply | 3N-380-50HZ | 3 | | Hot Medium | Oil | 4 | | Control Mode | PC Board Self - Optimized Microprocessor | 5 | | Accuracy Of Temp. Control | PID1 | 6 | | Max. Temperature | 350 | 7 | | Min. Temperature | 25 | 8 | | Heating Power | 18KW+18KW(adjustable) | 9 | | Heat Exchange Area | 0.1M2+0.1M2 | 10 | Pump | Model | TOE/NPY2251 | Power | 0.55KW | Lift | 50M | Flow | 30L/min | 11 | | Heating Method | Direct Heating(Indirect Cooling) | 12 | Pipeline | Hot

View Profile