Place of Origin :
1. Enhanced Overcurrent Protection
Provides reliable overload and short-circuit protection to ensure electrical systems are safeguarded.
· Rated for high breaking capacity of 6.0 kA.
· Suitable for both residential and commercial installations.
Product Type: Standard Miniature Circuit Breaker (MCB)
Standard: IEC/EN 60898-1 Compliance Guarantees Conformity With Global Safety And Performance Benchmarks.
Rated Current (In): Available In 16A, 20A, 32A, 40A, 63A, And 80A.
Rated Voltage (Ue): Operates At 230/400V AC.
Insulation Voltage (Ui): Rated At 500V, Ensuring Strong Dielectric Insulation Capability.
Rated Frequency: 50/60 Hz For Universal Adaptability.
Rated Breaking Capacity (Icn): 6000 A, Ensuring Safe Interruption Of Fault Currents.
Rated Impulse Withstand Voltage (Uimp): 4000V, Offering Resistance Against Overvoltage Transients Such As Lightning Or Switching Surges.
Dielectric Test Voltage: Withstands 2 KV At Industrial Frequency For 1 Minute.
Thermo-Magnetic Release Characteristics: Available In Curves B, C, And D, Making It Suitable For Different Applications Such As Lighting, Motor Protection, And High Inrush Loads.
Pollution Degree: 2 – Suitable For Normal Environments Where Only Non-conductive Pollution Occurs, Except For Occasional Temporary Conductivity Caused By Condensation.
Ambient Temperature Range: Operates From -25°C To +70°C, With A Daily Average ≤ 35°C.
Storage Temperature Range: Safe Storage Between -25°C And +70°C Without Affecting Performance.
Electrical Life: 6000 Cycles Of On-load Switching Operations.
Mechanical Life: 20000 Cycles, Ensuring A Long Operational Lifespan Even Under Frequent Use.
Protection Degree: IP20, Providing Protection Against Finger Contact And Ensuring User Safety During Handling And Maintenance.
Reference Temperature For Thermal Element: Calibrated For Consistent Tripping Performance In Varying Environments.
Connection Type: Supports Both cable And Pin-type Busbar Connections From Top And Bottom.
Terminal Size For Cable: 25 Mm² / AWG 18-3.
Terminal Size For Busbar: 25 Mm² / AWG 18-3.
Tightening Torque: 2 N·m (18 In-lbs) For Secure Electrical Contact And Long-term Stability.
