High Efficiency 35mm Diamond Core Bit SetStable Performance And Durability - Product

Other Specification : 35mm Granite Diamond Core Drill Bit / Hole Saw Dry Drilling Product Introduction Diamond Core Drills Are Mainly Used For Construction,such As Drilling Holes Ingranite And Concrete Wall. Dry Core Bits Are Typically Designed To Be Used With Hand-held Core Drills,anger Grinder Or Air Polishers Size: 35mm(1 3/8") Connection: Hexagonal Handle, M14, 5/8"-11 Working Condition:dry Use Or Wet Use Feature 1. Fast Drilling 2. Clean Drilling 3. Chip-free ,Stable Function And Performance How To Use Attach The Dry Core Bit Onto Your High-speed Angle Grinder Or Hand Held Core Drill. Mark The Location Of Holes That Need To Be Drilled. Use A Template As A Guide On The Stone In Order To Avoid Any Mistakes During Drilling Process. Clamp A Piece Of Stone Scrap Under The Stone Being Core Drilled To Prevent Excessive Chipping Or Blowout On The Back Side Of The Stone. Proceed With Drilling, Pressing Steadily Until The Dry Core Bit Drills Through The Stone. When Drilling Multiple Holes, Cool Off The Dry Core Bit By Dipping It In Cool Water After Each Drilled Hole. Frequently Asked Questions (FAQs) Q: What Materials Can Be Core Drilled Using The Dry Core Bits? A: The Dry Core Bits Are Designed To Be Used On Granite, Engineered Stone And Porcelain Slab Materials. Q: Can I Use The Dry Core Bits On Marble? A: No. Marble Is Too Soft And The Heat Created From Dry Core Drill May Crack The Material. Q: Can I Use The Dry Core Bit Wet? A: Yes. Although These Core Bits Are Designed For Dry Use, Wet Cutting Is Recommended Whenever Possible. When Core Drilling Within Residential Homes, The Dry Application Is Highly Recommended; This Will Save Time And Money For Time Consuming Clean-ups Of The Residence.Yes. Although These Core Bits Are Designed For Dry Use, Wet Cutting Is Recommended Whenever Possible. When Core Drilling Within Residential Home

View Profile