Silicone curing agent Vulcanizer vulcanization - Product

Brand : Kanglibang
Model : C-100A/B
Material : Silicone Vulcanizing Agent
Color : Clear Liquid

Other Specification : Silicone(Silicon) Curing Agent / Hardener / Coupling Agent / Catalyst / Vulcanization / Cross-linking Agent / Bridging Agent / Accelerant / Accelerator / Vulcanization Accelerator >>> Platinum Vulcanizing Agent Two Components Model: C-100 A / B Food Grade, Medical Grade. C-100A And C-100B Belongs To Platinum Addition Type Cross Linking Agent And Can Be Approved By FDA After Cured, Also Characterized By Non-toxic, Odourless, High Transparent And Well Anti-yellowing.The Materials Can Be Cured Again If Low-molecular-weight Is Strict By Request. This Agent Are Mainly Applied To Food Grade And Medical Grade Silicone Products, Such As Silicone Nipples, Cake Mold, Silicone Cookwares, Medical Silicone Parts Like Tube And So On, Also Can Be Used For Extrusion Products And Mobile Phone Keypad. High Quality Widely Used In Most Industries. ++++++ >>> Peroxide Vulcanizing Agent Single Component Model: C-15; C-16; C-16E >>>Application Physical Properties (Tested By KE-951U Gel) Appearance: Transparent / Milk White /subtranslucent Specific Gravity(g/cm³)(23°C) 0.9~1.0 Hardness(ShoreA) 49~51 Tensile Strength(Mpa): 10~13 Elongation(%): 500~530 Cracking Resistance(KN/m) 24~27 Compression Set %(100°C/22h) ≤5 Model Curing Temperature Application Ratio C-15 175°C 0.8-1.0% C-16 180°C 1.5-2.5% C-16E 130°C 1.0~1.2% This Agent Must Be Add By Many Time With A Small Quantity. If Not, Fewer Electrostatic Spark And Over Heat From Barrel Will Cause Material Burning During The Mixing Time, The Fire Can Be Put Out By Foam Extinguisher. Widely Industrial Use. All Silicone Rubber Products. Most Areas. More Solution

View Profile