Wood Polyurethane sealants glazing pu sealant for metals , Non-corrosive - Product
Place of Origin : Shenzhen,China
Delivery Time : Within 30 Days
Product Description
wood Polyurethane sealants glazing pu sealant for metals , Non-corrosive
* High durability.
* High abrasion resistance and tear strength.
* Good weathering and water resistance.
* Ready for immediate use - no mixing.
* Non-corrosive.
Description:
I-Like Structural PU Sealant is a PU sealant specially designed for structural glazing purpose. It is widely used for the bonding and sealing of glass, metal, plastic, stone, ceramic and rubber, etc. It has features of :
* Exc
Physical Specification
Other Specification :
Wood Polyurethane Sealants Glazing Pu Sealant For Metals , Non-corrosive
* High Durability.
* High Abrasion Resistance And Tear Strength.
* Good Weathering And Water Resistance.
* Ready For Immediate Use - No Mixing.
* Non-corrosive.
Description:
I-Like Structural PU Sealant Is A PU Sealant Specially Designed For Structural Glazing Purpose. It Is Widely Used For The Bonding And Sealing Of Glass, Metal, Plastic, Stone, Ceramic And Rubber, Etc. It Has Features Of :
* Excellent Adhesion On All Cement-based Materials, Brick, Ceramics, Metals, Wood, Polyurethane, Epoxy, And Some Polyesters.
* Fast Cure Rate.
* High Durability.
* High Abrasion Resistance And Tear Strength.
* Good Weathering And Water Resistance.
* No Sagging On Vertical Joints Up To 30 Mm Width.
* Ready For Immediate Use - No Mixing.
* Non-corrosive.
* Can Be Painted Over With Many Water, Solvent And Rubber-based Paints (preliminary Tests Recommended).
* Certified For Use In Contact With Potable Water
Directions:
Surface Preparation
Clean, Solid, Dry And Free Of Oil, Grease And Surface Contaminants Such As Form Release Agents, Curing Membranes And Hydrophobic Water Repellants. Thoroughly Remove All Loose Particles And Dust.
Application:
Minimum Application Temperature Is 5C. For Easier Use Store Cartridges At Temperatures Between 10C And 20C. For Adhesive Purposes Apply In Spots Or Beads On The Prepared Surface, Tapping Or Pressing The Part To Be Adhered Against The Substrate. The Thickness Of The Bead Depends On The Surface Texture (1 Mm To 5 Mm). When Sealing Is Completed, Joints May Be Smoothed With A 20% Solution Of Washing Up Detergent In Water. When Masking Sides Of Joints For Neatness, Remove Tape Before The Sealant Cures. Always Allow Sufficient Surface Exposed To Moisture.
Precautions:
-To Do The Experiment In Advance Is The Necess