Fast curing polyurethane sealants / construction sealant 310ml - Product

Other Specification :  Fast Curing Polyurethane Sealants / Construction Sealant 310ml -noncorrosive To Base Material, No Penetration Pollution; -solvent Free, Nontoxic And Odorless; -excellent Antiaging Property; -excellent Surface Spreading Property. Description: I-Like Construction PU Sealant Isa Single Component Moisture Cure Sealant That Can Be Used For Exterior And Interior Caulking. Ideal For Use In Roofing, Siding And Window Installation. The Cured Sealant Adheres Well To Most Common Substrates Such As Masonry, Concrete, Glass And Aluminum Without Priming. -One-Pack Polyurethane System -Easy Application And No Problem With Mixing Because Of One-packing PU System. -Good Elasticity And Restoration Prevents Movement Of Substrate On Thermal Change Condition -Even After Vulcanization, Has Initial Flexibility Gives Strong Resistance Against The Continuous Restore And Elongation. -Good Durability. -Decrease Of Construction Cost And Time. -Extended Use Of Various Thermal Range. (20-79C) Directions: 1. Cleaning The Surface: Take The Appropriate Amount Of Supported Cleaner Into Clean And Dry Special Container(timely Seal The Original Packing). Use The Clean Absorbent Cotton Or Other Materials To Dip The Cleaner, Clean Up The Grease And Dust On The To-be-bonded Surface, Then Completely Dry(about 10 Minutes, Ranging With The Temperature And Humidity). 2. Brushing The Primer: Completely Shake Up The Primer, Then Take The Appropriate Amount Of Primer Into The Special Container(timely Seal The Original Packing). Brush A Thin Layer Of Primer On The Cleaned Surface With The Soft Wool Brusher, Then Completely Dry(about 10 Minutes, Ranging With The Temperature And Humidity). 3. Gelatinizing And Installation: Open The Hole On The Head End Of Aluminum Canister Using Cone, Screw On The Plastic Nozzle, Then Open The Mouth Using Sharp Knife On The

View Profile