Platinum cured silicone rubber for tire mold - Product
MINIMUM QUANTITY
200 KILOGRAM
Place of Origin : Shenzhen,China
Delivery Terms : By Sea
Delivery Time : Within 3 Days After Payment Confirmed In Our Bank
Product Capacity : 8 Ton Per Day
Payment Terms : FOB
Product Description
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It’s mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1)Non- shrinkage
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Basic Information
Brand : HY Platinum Cured Silicone Rubber For Tire Mold
Model : HY-E6 Series Platinum Cured Silicone Rubber For Ti
Material : Silicone And Catalyst
Color : White
Expiry/Validation Period : 10~12months
Physical Specification
Size or Volume : Small Or Large
Weight : 1kg/ Bottle , 5 Kg/drum Vacuumed Packing, 25kgs/dr
Other Specification : Description Of Platinum Cured Silicone Rubber
Platinum Cure Silicone Rubber Is A Kind Of Translucent Liquid , Generally Named Two-components Silicone Rubber With Mixing In 1:1 .It’s Mainly Suitable For Tire Molds Making .
Advantage Of Platinum Cure Silicone Rubber For Tire Mold
1)Non- Shrinkage
2)high Tensile And Tear Strength With High Copy Times
3) Exceptional Fluidity And Good Operability (mixing Ratio At 1:1 )
4)high Temperature Resistant In 250 Centigrade
Operation Instruction Of Platinum Cure Silicone Rubber For Tire Mold
Step One: Take 100g Of Part A And 100g Of Part B And Mix In 1:1 And Mix The Two Part Evenly.
Step Two: Vacuum Pumping
Without Exception, This Step Takes Less Than 10 Minutes.
Note: The Time For Vacuum-pumping Should Be Less Than 3—5 Minutes ,otherwise, Once The Silicone Rubber Has Cross-link Reaction During Vacuum Pumping Process, It Will Not Be Operated.
Step Three: Pouring The Mixture Into The Frame With Original Mold Slowly .
Shelf Life For Silicon Rubber For Mold Making
8~10months, When Stored In A Dry & Cool Place Under The Room Temperature 25.
Packing For Silicon Rubber For Mold Making
20kg/drum For Part A+ 20kg/drum For Part B In One Set
,200 Kg/drum For Part A+ 200kg/drum For Part B In One Set
For More Information , Pls Feel Free To Contact Ms Mabel
Office No. :0086-755-89948019
Mob:86-18929239655
Skype: Mabel9166
Email :hyyd(at)szrl(dot)net
Welcome To Our Website Www Dot Szrl Dot Net