JA201# Polyurethane Resin - Product

Brand : Hong Ye Resin
Material : Resin

Other Specification : Technical Parameters Code Mix Ratio （%）Shrinkage Hardness （MPa.s25℃）Viscosity Viscosity After Mixed Operation Times Yellowing Resistance JA201# A:B=1:1 0.02%-0.05% 20-70A 600-1000 800-1500 15-30mins 1000-2000 Characteristics ＊Good Radiation Resistance , Yellow Resistance And Good Hardness, It Is Very Suitable For Outdoor Products ＊Good Resistant Of UV And Aging ＊Non Change Hardness, Not Easy Broken, No Shrinkage And Non Deformation ,and Good Adhensive ,and Good Sunshine Resistance For The Long Time Using ＊Low Viscosity, And Good Leveling Operation Instructions 1, Operated Under The Conditions Of Ventilation Environment. 2, Prepare The Tools , And Make Sure It Is Clean ,dry . Un-oil ,and Not Contact With Any Chemical Solvent 3, Weigh Part A And Part B Exactly ( Multi-component Part A Will Leads To The Bottom Of The Bubble, Multi-component B May Cause Surface Sticky). 4 Carefully Stir In The Same Direction To Avoid A Large Number Of Bubbles, You Need Patience And Stir Until Completely Transparent. 5, Vacuum Pumping : Vacuum Pumping By Vacuum Machine Warm Tips : 1 The Humidity Should Less Than 60% If Using By Hand , You Would Better To Use A Dehumidifier   2 You Would Better To Use Metal Or Plastic Tools Instead Of Wooden Articles .   3 You Should Make Sure Your Products Is Very Dry , And Can Not Use Inks Containing Glycerol.   4 This Product (especially B Glue) Can’t Contact With Skin , Otherwise Please Wash With Plenty Of Water And Soap   5 Resin Will Be Cured With High Temperature And Cured Very Fast   6 Far Away From Children To Prevent Eating. Package 2KG/Set Or 10KG/set Packing Shelf Life Six (6) Months When Stored Under Dry And Cool Place By Original Package Under 25℃ For More Information, Please Feel Free To Contact Mr. Timo Tel: +86-0755-89212365 Mob: +86-18938867564 Skype: Hyjtimo

View Profile