Waterproof Mosaic Tiles Adhesive Safety C2 For Swimming Pool - Product

Other Specification :  Waterproof Mosaic Tiles Adhesive Safety C2 For Swimming Pool PB-106 Is A Kind Of High Quality Environment-friendly Waterborne Powder Which Can Be Mixed With Water And Used For Bonding Ceramic Tile On The Surfaces Of Wall, Ground And Floor. It Is Easily Applied And Can Achieve An Excellent Adhesion.. Features: PB-106 Is A Kind Of Synthetic Rubber Latex, Mixing With The Ceramic Tile Adhesive (premixed Graded Fine Sand, Special Additives And Synthetic Resin) To Form A High Viscosity Achieve, Which Can Be Used In All Kinds Of Construction Surface. PB-106 Can Also Be Mixed With Sand And Cement. The Adhesive Can Harden Without Obvious Shrinkage. It Will Not Slip Off When Pasting A Heavy Ceramic Tile In The Vertical Surface. Operation Process: 1, Substrate Preparation 1) The Substrate Surface Should Be Firm, Dry And Clean, No Grease, No Wax, Or Other Loose Materials. 2) The Cement Surface Should Not Be Shrinking After Pasting The Ceramic Tile. 3) Each 1cm-thick Plastering Should Be Maintained At Least 1 Week. 4) Cooling The Substrate When It Is Too Hot. 2, Application Of Adhesive: 1) Use A Notched Trowel To Paste The Adhesive. The General Principle Of Choosing A Correct Trowel Is That The Coverage In The Interior Wall And Lightloading Area Is At Least 65~70%, While 100% In The Exterior Wall And Overloading Area. 2) Paste One Layer On The Surface With The Flat Surface Of The Trowel To Reach A High-bond-strength Effect, Then Choose The Size Of The Notched Trowel According To The Size And Type Of The Ceramic Tile. - - - - Typical Ceramic Tile | Mosaic Size55cm | Normal Ceramic Tile | Ground,plane, Or The Ceramic Tile Uneven | Pinbangnotched Trowel Type | SquareNo.4, About 2~2.5kg/ | TypeV No.5, About 3kg/ | TypeV No.6, About 5kg/

View Profile