Place of Origin :
Delivery Time : 15day
Product Capacity : 15,000 Square Feet Per Day
The processing craft of brushed aluminium composite panel is a kind of manufacturing process that repeatedly uses sandpaper to scrape out wires on the surface of the aluminum composite panel. The process is mainly divided into three parts: degrease, the sand mill and water scrubbing.
The Processing Craft Of brushed Aluminium Composite Panel is A Kind Of Manufacturing Process That Repeatedly Uses Sandpaper To Scrape Out Wires On The Surface Of The Aluminum Composite Panel. The Process Is Mainly Divided Into Three Parts: Degrease, The Sand Mill And Water Scrubbing. In The Wire Drawing Process Of The Aluminum Composite Panel, After The Anode Processing, The Special Skin Membrane Technology Will Generate An Epithelial Layer, Which Contains Metal, On The Surface Of The Aluminum Composite Panel, Making Each Tiny Wire Is Clearly Visible, Thus Showing Gloss On The Matte Metallic. Nowadays More And More Aluminum Composite Panel Products Have Adopted Wire Drawing Craft On The Surface Of The Aluminum Panel To Make It Beautiful And Corrosion Resistant. Making Products Both Fashionable And Technological Is One Of The Reasons Why The Technology Is So Popular.
The Wire Drawing Of The brushed Aluminium Composite Sheet Can Be Divided Into Straight Lines And Shredded Strands. There Are Other Kinds Of Drawing Effects, Such As Weaving, Folding And So On.
Forth, The Aluminum Composite Panel Is Installed On The Internal Frame Of The Profile. First, Drill The Milling Screw At The Right Position, And Fix The Aluminum Composite Panel Veneer On The Steel Frame With Rivets. The Gap Between Plates Should Be 10 ~ 15mm. And Then Inject Silicone Weathering Sealant. Before The Aluminum Plate Is Installed, It Is Forbidden To Remove The Wrapping Paper Until It Is Finished. The Construction Should Be Operated According To The Arrow Direction Marked On The Aluminum Composite Panel.
