High Efficiency Small Reaction Francis Hydro Turbine With Capacity Below 5MW   Descrition:   The Francis Type Turbine Is Mostly Suitable For Hydropower stations With Medium Or High Head From 10m To 300m. They Are In Both Vertical ...Read More

Large Francis Reaction Hydro Power Turbine For Head 10m - 300m   Specifications:   - - - - Type | Horizontal/vertical Francis Turbine | Water Head | From 10m To 300m. | Installation Capacity | From 100KW To 20 ...Read More

Large Vertical Francis Hydro Power Turbine With Capacity Below 20MW   Applications:   1.     Water Head: From 10m To 300m 2.      Power: 100kw To 30Mw  3.     Frequency: 50hz Or 60hz ...Read More

Vertical Large Francis Hydro Power Turbine For Frequency 50Hz - 60Hz   Descrition:   The Francis Type Turbine Is Mostly Suitable For Hydropower stations With Medium Or High Head From 10m To 300m. They Are In Both Vertical Or Hori ...Read More

Medium / High Head Vertical Francis Hydro Turbine For 10m - 300m   Applications:   1.     Water Head: From 10m To 300m 2.      Power: 100kw To 30Mw  3.     Frequency: 50hz Or 60hz  ...Read More

High Head Vertical Francis Hydro Reaction Turbine With Capacity Below 20MW   Descrition:   The Francis Type Turbine Is Mostly Suitable For Hydropower stations With Medium Or High Head From 10m To 300m. They Are In Both Vertical O ...Read More

AC Three Phase  Medium / Larger  Francis Hydro Turbine With 50Hz / 60Hz   Descrition:    Normally, We Adopt The Horizontal Francis With Capacity Below 5MW, Runner Diameter Below 90cm. And The Vertical Francis With Capacity ...Read More

400V, 3.3KV Small Francis Reaction Hydro Turbine With Synchro Generator   Specifications:   - - - - Type | Horizontal/vertical Francis Turbine | Water Head | From 10m To 300m. | Installation Capacity | From 10 ...Read More

Horizontal Francis Hydro Turbine With Runner Diameter Below 90cm   Applications:   1.     Water Head: From 10m To 300m 2.      Power: 100kw To 30Mw  3.     Frequency: 50hz Or 60hz  ...Read More

Horizontal Small Francis Hydro Turbine With 100kw - 5Mw   Descrition:   The Francis Type Turbine Is Mostly Suitable For Hydropower stations With Medium Or High Head From 10m To 300m. They Are In Both Vertical Or Horizontal Shaft ...Read More

6.3KV, 10.5KV Impulse Pelton Hydro Turbine With Synchro Generator   Descrition:   The Pelton Turbine Is Widely Used In Hydropower Station With The Heads From 80-1600m.   Pelton Turbine Is Consisted Of Runner, Turbine Case, ...Read More

Kaplan Hydro Water Turbine With Open Flume, Pressure Flume, And Seal Off   Descrition:   The Kaplan (axial-flow) Turbine For Low Head From 2m To 70m. This Type Of Turbine Is Mostly Suitable For Hydropower stations With Low Water ...Read More