Place of Origin : Shijiahzuang,China
Post Date : 19-08-2012
Expiry Date : 19-09-2015

1. This Machine Adopts Electrical & Electronic Synchronous Control Technique, Both Separate-phase Welding And Welding Time Is Composed Of Digital And Integrated Electric Circuit.
2. The Operation Is Accurate, It Has Stable Function, Firm Welded Point, And Without Welded Tracks.
3. The Longitude Wires Are Fed From Coils. The Cross Wires Are Fed From Coils While The Diameter Of Cross Wire Is 1.8-2.5mm. Also The Cross Wires Should Be Pre-straightened And Pre-cut When The Diameter Of Cross Wire Is 2.6-3.0mm.
4. The Machine Is Equipped With Precise Equipment For Weft Cutting Positioning, So The Length Of Wefts Is Identical And Regular, It Is Unnecessary To Slice The Side.
5. Mesh Pulling System Adopts Elastic Tension And Opening Positioning Mesh, It Is Easy To Regulate Mesh Hole, And Mesh Opening Size Is Rather Accurate, Welding Aperture Could Adjust Randomly Within Range.
6. Not Only Welding Speed Is Fast, It Is Easy To Learn And Operate. Only One Worker Can Finish The Operation.