Place of Origin : Hengshui,China
Post Date : 29-05-2012
Expiry Date : 30-12-2020
Contact Person: Linda Kang
Email: Nihao1985@hotmail.com
Installation Details Of QZ Spherical Bearing:
1. QZ Spherical Bearing Shall Not Be Used On Bridges Where The Concrete For The Beam, Pier And Platform Is Lower Than C35, Unless Specially Approved By The Designer.
2.Install QZ Spherical Bearing And Anchor Bolts: To Adjust Bearing Level Putting Wedges Under Bearing Base Plate, And To Make Sure QZ Spherical Bearing Base Plate Above The Pier And Platform Top 20 ~ 50mm. Center The QZ Spherical Bearing To The Right Place. Filling In Bolt Holes And Bearing Bottom Cushion With Epoxy Mortar.
3. The QZ Spherical Bearing Shall Connect With The Beam, Pier And Platform With The Embedded Bolts. If Necessary, Welding To The Embedded Steel Plate Is Allowed, But Cautions Shall Be Taken To Bearing And Concrete Being Damaged By The High Heat From The Steel Bearing Being Welded.
Almost Every Bridge And Highway In China Is Using Our Spherical Bearing.