Module Fiber Optic - Product

Other Specification :  Hot Pluggable TR X 1310nm 10KM SFP+ LR Optical Fiber Transceiver Components 10G Module Features 1.Optical Interface Compliant To IEEE 802.3ae 10GBASE-LR 2.Electrical Interface Compliant To SFF-8431 3.Hot Pluggable 4.1310nm DFB Transmitter, PIN Photo-detector 5.Operating Case Temperature: 0 To 70 C 6.Low Power Consumption 7.Applicable For 10km SMF Connection 8.All-metal Housing For Superior EMI Performance 9.Advanced Firmware Allow Customer System Encryption Information To Be Stored In Transceiver 10.Cost Effective SFP+ Solution, Enables Higher Port Densities And Greater Bandwidth Applications 10GBASE-LR At 10.3125Gbps 10GBASE-LW At 9.953Gbps Other Optical Links Product Description This 1310 Nm DFB 10Gigabit SFP+ Transceiver Is Designed To Transmit And Receive Optical Data Over Single Mode Optical Fiber For Link Length 10km. The SFP+ LR Module Electrical Interface Is Compliant To SFI Electrical Specifications. The Transmitter Input And Receiver Output Impedance Is 100 Ohms Differential. Data Lines Are Internally AC Coupled. The Module Provides Differential Termination And Reduce Differential To Common Mode Conversion For Quality Signal Termination And Low EMI. SFI Typically Operates Over 200 Mm Of Improved FR4 Material Or Up To About 150mmof Standard FR4 With One Connector. In The Transmit Direction, The SFP+ Transceiver Module Receives A 10.3125 Gb/s Electrical Signal (signaling Rate) From The Host Board Asic/SerDes And Converts The Data To An Optical Signal Via The Laser Driver That Controls The Laser Diode In The Transmitter Optical Sub-Assembly (TOSA). An Open Collector Compatible Transmit Disable (Tx_Dis) Is Provided. A Logic 1, Or No Connection On This Pin Will Disable The Laser From Transmitting. A Logic 0 On This Pin Provides Normal Operation. The Transmitter Has An Internal Automatic Power Control Loop (AP

View Profile